fast ass motorr!!!!
#1
Registered Member
Thread Starter
Join Date: Jan 2010
Location: culpeper
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
fast ass motorr!!!!
name: matt
Location: culpeper
contact: 540 229 2940 or pm me
price: 2,000 obo
ALL PARTS LISTED ARE INCLUDED!!!!!!!
406 cubic in motor
turbo tranny with trans shield and brake,
tci converter (pretty much new only has like 8 passes on it)
720 lift cams( have cam card but is in the car in maryland right now)
gm steel head (ported, polished, and milded when pulled out)
low compression ready to be put on the bottle.
no stock parts motor was fully built all ready to be ran.
motor came out of a nove wieghed about 3,500 and ran 6.90 on an eigth quarter mile track.
pulls hard and throws you the FUCK back in the seat.
all together the work done to it after it was takin out is around $8,000 and hasent been ran.
also there are a few old parts that can come along with it. i dont know every little detail becuase its my dads and i dont live with him but pm me or hit the cell up and i can have you talk straight to him if your really interested. all toghether we spent well over TEN GRAND on the motor and tranny.
Location: culpeper
contact: 540 229 2940 or pm me
price: 2,000 obo
ALL PARTS LISTED ARE INCLUDED!!!!!!!
406 cubic in motor
turbo tranny with trans shield and brake,
tci converter (pretty much new only has like 8 passes on it)
720 lift cams( have cam card but is in the car in maryland right now)
gm steel head (ported, polished, and milded when pulled out)
low compression ready to be put on the bottle.
no stock parts motor was fully built all ready to be ran.
motor came out of a nove wieghed about 3,500 and ran 6.90 on an eigth quarter mile track.
pulls hard and throws you the FUCK back in the seat.
all together the work done to it after it was takin out is around $8,000 and hasent been ran.
also there are a few old parts that can come along with it. i dont know every little detail becuase its my dads and i dont live with him but pm me or hit the cell up and i can have you talk straight to him if your really interested. all toghether we spent well over TEN GRAND on the motor and tranny.
Last edited by egskutin$; 03-29-2010 at 04:38 AM.
#2
Re: fast ass motorr!!!!
2000 gets you what? what crank, pistons? compression ratio? who built it? Rods? heads?
#3
Registered Member
Thread Starter
Join Date: Jan 2010
Location: culpeper
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
2000 for it all. all the other stuff u will have to text me tomorrow or pm me tomorrow and i will give u all the information on it. a guy in manassas built it. the converter is pretty much brand new.
#4
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
what block?what heads?build sheet?
you need to find out what parts are in it
block?bore size?
crank?stroke?
rods?
pistons/rings?
heads?
valves?
stud girdles?
roller rockers?
what size cam is in it?
what intake?
what carb ?
what did it run at the track and what did the car weigh with driver?
was it being sprayed?
you need to find out what parts are in it
block?bore size?
crank?stroke?
rods?
pistons/rings?
heads?
valves?
stud girdles?
roller rockers?
what size cam is in it?
what intake?
what carb ?
what did it run at the track and what did the car weigh with driver?
was it being sprayed?
Last edited by nftuatn; 03-28-2010 at 07:17 PM.
#5
Registered Member
Thread Starter
Join Date: Jan 2010
Location: culpeper
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
no spray all motor not sure on how much it wieghed. like i said hit me up tomorrow i can give all that to you. its my dads and i dont live with him i can give you his number if your interested. it ran around 7 flat on eigth quarter mile track. car is very heavy though. wasnt tubbed out or anything.
#6
CIMSPORT
Join Date: Mar 2004
Location: central, VA
Posts: 5,199
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
What the fuck is an "eighth quarter mile track"? LOL. You also say it ran around 7 flat but then say it hasn't been ran...? Wtf? Sounds like you don't have a fucking clue about anything. Mods, please close this thread
#7
brenthedge x))
Join Date: Jul 2009
Location: Fredericksburg
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
name: matt
Location: culpeper
contact: 540 229 2940 or pm me
price: 2,000 obo
ALL PARTS LISTED ARE INCLUDED!!!!!!!
406 cubic in motor
turbo tranny with trans shield and brake,
tci converter (pretty much new only has like 8 passes on it)
720 lift cams( have cam card but is in the car in maryland right now)
gm steel head (ported, polished, and milded when pulled out)
low compression ready to be put on the bottle.
no stock parts motor was fully built all ready to be ran.
motor came out of a nove wieghed about 3,500 and ran 6.90 on an eigth quarter mile track.
pulls hard and throws you the FUCK back in the seat.
all together the work done to it after it was takin out is around $8,000 and hasent been ran.
also there are a few old parts that can come along with it. i dont know every little detail becuase its my dads and i dont live with him but pm me or hit the cell up and i can have you talk straight to him if your really interested. all toghether we spent well over TEN GRAND on the motor and tranny.
Location: culpeper
contact: 540 229 2940 or pm me
price: 2,000 obo
ALL PARTS LISTED ARE INCLUDED!!!!!!!
406 cubic in motor
turbo tranny with trans shield and brake,
tci converter (pretty much new only has like 8 passes on it)
720 lift cams( have cam card but is in the car in maryland right now)
gm steel head (ported, polished, and milded when pulled out)
low compression ready to be put on the bottle.
no stock parts motor was fully built all ready to be ran.
motor came out of a nove wieghed about 3,500 and ran 6.90 on an eigth quarter mile track.
pulls hard and throws you the FUCK back in the seat.
all together the work done to it after it was takin out is around $8,000 and hasent been ran.
also there are a few old parts that can come along with it. i dont know every little detail becuase its my dads and i dont live with him but pm me or hit the cell up and i can have you talk straight to him if your really interested. all toghether we spent well over TEN GRAND on the motor and tranny.
#8
WEEEEEEEEEEE
Re: fast ass motorr!!!!
dude doesn't know what he is talking about, has no real info, and it's a third party sale...
#9
brenthedge x))
Join Date: Jul 2009
Location: Fredericksburg
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
#10
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: fast ass motorr!!!!
what block?what heads?build sheet?
you need to find out what parts are in it
block?bore size?
crank?stroke?
rods?
pistons/rings?
heads?
valves?
stud girdles?
roller rockers?
what size cam is in it?
what intake?
what carb ?
what did it run at the track and what did the car weigh with driver?
was it being sprayed?
you need to find out what parts are in it
block?bore size?
crank?stroke?
rods?
pistons/rings?
heads?
valves?
stud girdles?
roller rockers?
what size cam is in it?
what intake?
what carb ?
what did it run at the track and what did the car weigh with driver?
was it being sprayed?