F/S built Sr20det black top with around 2k miles on it.. runs good no problems!!!!!!
02-21-2009, 10:57 AM
#1
Registered member
Thread Starter
Join Date: Apr 2008
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
F/S built Sr20det black top with around 2k miles on it.. runs good no problems!!!!!!
i REALLY REALLY dont want to do this but i just got a 350z and i need to pay for it now..
BUILT sr20det bottum end with Rebuilt sr20det head.
Block-
CP pistons- stock bore......................................cost- 500
Eagle rods- stock stroke....................................cost-320
Clevite bearings.......................................... ......cost-60
ARP main studs............................................. ...cost-110
ARP head studs............................................. ...cost-120
cosworth metal HG...........................................cost-135
greddy Ras............................................... ........cost- 70
total-1315 in parts+ machine bill + around 800 for long block
block was honed and decked, Crank was polished, Head was pressure tested and cleaned up. New valve guides were installed and it had a vlave job done....... the machine bill was through the roof... all work was done at a real machine shop.. engine was assembled by pros.. no back yard noob hands touched this engine.
i bought it in a s13 to put in my s14 and it actually runs now but i just need to sell it for my 350z... thats the ONLY reason
price- 1780 no pan, add 250 for a real Trust
1780 only covers the parts + like half the machine bill... you are walking away with a free block, crank, head, valve cover, and labor
does not come with any sensors or manis
BUILT sr20det bottum end with Rebuilt sr20det head.
Block-
CP pistons- stock bore......................................cost- 500
Eagle rods- stock stroke....................................cost-320
Clevite bearings.......................................... ......cost-60
ARP main studs............................................. ...cost-110
ARP head studs............................................. ...cost-120
cosworth metal HG...........................................cost-135
greddy Ras............................................... ........cost- 70
total-1315 in parts+ machine bill + around 800 for long block
block was honed and decked, Crank was polished, Head was pressure tested and cleaned up. New valve guides were installed and it had a vlave job done....... the machine bill was through the roof... all work was done at a real machine shop.. engine was assembled by pros.. no back yard noob hands touched this engine.
i bought it in a s13 to put in my s14 and it actually runs now but i just need to sell it for my 350z... thats the ONLY reason
price- 1780 no pan, add 250 for a real Trust
1780 only covers the parts + like half the machine bill... you are walking away with a free block, crank, head, valve cover, and labor
does not come with any sensors or manis
Last edited by ((sr)) kelly; 02-21-2009 at 11:00 AM.
Re: F/S built Sr20det black top with around 2k miles on it.. runs good no problems!!!
Thread
Thread Starter
Forum
Replies
Last Post