EF, EG, D series, DOHC ZC parts and B16 obd0 ecu
05-22-2012, 08:55 AM
#1
Registered Member
Thread Starter
Join Date: Apr 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
EF, EG, D series, DOHC ZC parts and B16 obd0 ecu
Name: Alex
Location: Ashland, Richmond, Louisa
Means of contact: 804-878-6307
Price: $ obo
Description:
#Honda EG front shock forks - 20 for both, obo.
#EF hatch stock springs - 40,
oEG axles used, no clicking but rubber boots do have cracks and cuts - 50 for both, obo
B16 PR3 manual ecu - 75
D16A1/ZC PG7 auto ecu - 50
EF tach cluster with RPM gauge (pulled from a automatic) - 40, obo
EF tach cluster with no RPM gauge- 30,
oEG dx manual tranny that has around 150k on it when pulled, no grinds or pop outs. Also has release bearing, fork, and fork outside boot. D series hydro S20 - 130, obo
EF cable D series tranny SL3, four speed. No pop outs or grinds, unknown mileage but I just pulled it out from my dd a couple months ago and drove on it for over a year. - 100, obo
D16Y8 bare block, no internals or sensors, it's been wrapped up in a trash bag for about two years. - 70, obo
DC Integra stock rear sway bar. - 30, obo
DOHC ZC motor and extra parts. I have some extra parts that came off a D16A1. Such as oil pan, oil pick up tube, girdle and bolts, dizzy, two exhaust cam sensors (I believe it's referred to as CYP sensor), valve cover, brand new in box TD-03 dizzy. The ZC head is complete with valves, retainers, springs, and sensors. The bottom end block has sensors, flywheel, crank, and girdle. I also have a set of aftermarket cams, and stock PM7 pistons.#The ZC is from hmotors online, I bought it as a spare four my dd and build it but I now have a project car and just wanna keep it as the gas sipper it is. I had no plans of selling this motor and parts but for the right price I'll let it go. So just give me a reasonable offer, the worst I could say is no thanks.
I'm pretty sure that's everything
And I do have pictures of everything I'm selling, so I can send them if needed. I'm open to trades for B series stuff too, so there's that option also. Again my cell is 804-878-6307.
Location: Ashland, Richmond, Louisa
Means of contact: 804-878-6307
Price: $ obo
Description:
#Honda EG front shock forks - 20 for both, obo.
#EF hatch stock springs - 40,
oEG axles used, no clicking but rubber boots do have cracks and cuts - 50 for both, obo
B16 PR3 manual ecu - 75
D16A1/ZC PG7 auto ecu - 50
EF tach cluster with RPM gauge (pulled from a automatic) - 40, obo
EF tach cluster with no RPM gauge- 30,
oEG dx manual tranny that has around 150k on it when pulled, no grinds or pop outs. Also has release bearing, fork, and fork outside boot. D series hydro S20 - 130, obo
EF cable D series tranny SL3, four speed. No pop outs or grinds, unknown mileage but I just pulled it out from my dd a couple months ago and drove on it for over a year. - 100, obo
D16Y8 bare block, no internals or sensors, it's been wrapped up in a trash bag for about two years. - 70, obo
DC Integra stock rear sway bar. - 30, obo
DOHC ZC motor and extra parts. I have some extra parts that came off a D16A1. Such as oil pan, oil pick up tube, girdle and bolts, dizzy, two exhaust cam sensors (I believe it's referred to as CYP sensor), valve cover, brand new in box TD-03 dizzy. The ZC head is complete with valves, retainers, springs, and sensors. The bottom end block has sensors, flywheel, crank, and girdle. I also have a set of aftermarket cams, and stock PM7 pistons.#The ZC is from hmotors online, I bought it as a spare four my dd and build it but I now have a project car and just wanna keep it as the gas sipper it is. I had no plans of selling this motor and parts but for the right price I'll let it go. So just give me a reasonable offer, the worst I could say is no thanks.
I'm pretty sure that's everything
And I do have pictures of everything I'm selling, so I can send them if needed. I'm open to trades for B series stuff too, so there's that option also. Again my cell is 804-878-6307.
Thread
Thread Starter
Forum
Replies
Last Post