complete b20, wire harness, ecu, hoses etc CHEAP
#1
fuck this shit
Thread Starter
Join Date: Jul 2008
Location: VA Beach
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
complete b20, wire harness, ecu, hoses etc CHEAP
Name: G
Location: va
Means of contact: post up here
Price: $500 obo
Description:
I need this motor sold ASAP. I will accept or entertain any REASONABLE offer. Don't offer me your dog, 3 f22 pistons and a soda, because I will ignore you. This motor is being sold AS IS. There is nothing wrong with it, I just can not be responsible for any stupidity.
What it is: I have a complete B20z2 out of an automatic CRV. It has the ls intake mani because b20 is too tall for most swap applications. This motor has some painted parts and that's because it was briefly in a 95 civic coupe while my other motor was being built about a year ago. Mainly thought it was cool to have all different colors, but now it seems silly. Past that, I've not messed with it.
Mileage: 88,xxx, Approximately
What's included:
Complete motor (head, block, all internals etc)
Intake manifold with all sensors intact
Throttle body, with both TPS and MAf sensors
Exhaust manifold, stock, with heat shield
Distributer
Complete UN-CUT Engine harness
ECU for 5 speed setup
Intake tube, no filter. I sold the air-box setup already
Aftermarket "Header", it's dinged up pretty badly on the bottom, but it's better than stock I suppose.
And for the right price, I'll even throw in a spare, newer valve cover. (OBD2)
I'm sure there's more, but I don't remember all of it. Please contact me for more details.
Thanks
Pictures:
Location: va
Means of contact: post up here
Price: $500 obo
Description:
I need this motor sold ASAP. I will accept or entertain any REASONABLE offer. Don't offer me your dog, 3 f22 pistons and a soda, because I will ignore you. This motor is being sold AS IS. There is nothing wrong with it, I just can not be responsible for any stupidity.
What it is: I have a complete B20z2 out of an automatic CRV. It has the ls intake mani because b20 is too tall for most swap applications. This motor has some painted parts and that's because it was briefly in a 95 civic coupe while my other motor was being built about a year ago. Mainly thought it was cool to have all different colors, but now it seems silly. Past that, I've not messed with it.
Mileage: 88,xxx, Approximately
What's included:
Complete motor (head, block, all internals etc)
Intake manifold with all sensors intact
Throttle body, with both TPS and MAf sensors
Exhaust manifold, stock, with heat shield
Distributer
Complete UN-CUT Engine harness
ECU for 5 speed setup
Intake tube, no filter. I sold the air-box setup already
Aftermarket "Header", it's dinged up pretty badly on the bottom, but it's better than stock I suppose.
And for the right price, I'll even throw in a spare, newer valve cover. (OBD2)
I'm sure there's more, but I don't remember all of it. Please contact me for more details.
Thanks
Pictures:
#4
Re: complete b20, wire harness, ecu, hoses etc CHEAP
I would not take that offer seriously... DO you know the specs on this motor.. ?? kinda looks like its been beat on.. ie.. painted distributer and valve cover.. Compression tests? Burn oil.. etc.. need some info.. very interested.. just need bottom end though
#5
fuck this shit
Thread Starter
Join Date: Jul 2008
Location: VA Beach
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
Re: complete b20, wire harness, ecu, hoses etc CHEAP
Would not take what offer seriously? I had painted parts because I blew my LS like 3 cars ago, and had this in for roughly a month, and had the parts on my blown motor. This was back when I thought painting shit was cool, as stated in the ad. If it makes you feel better, I can strip the parts, and re-install the stock b20 manifold and sell it bone fucking stock. It didn't burn oil, knock, or have anything wrong, but I haven't ran this motor in over a year and can not guarantee any part of it because I am not H-motors or J-spec. Price is OBO and I don't care to separate at this time, because I am in the process of moving and just want this gone so I don't have to take it with me or throw it out. I can do all kinds of tests tomorrow, but I'm busy and have other shit going on and am looking to move this, not dick around with it for a day.
Last edited by grgazn; 06-06-2011 at 05:56 PM.
#6
11B3P
Join Date: May 2011
Location: Augusta County, VA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Re: complete b20, wire harness, ecu, hoses etc CHEAP
What year is this z? 99-00? From the looks of it, this looks like an older B20, possibly an A? or just for some reason has the older valve cover. Might be interested if this is the high compression motor.
Last edited by Airborne29th; 06-07-2011 at 08:29 AM.
#8
Re: complete b20, wire harness, ecu, hoses etc CHEAP
b20z2 block, stage 2 b-series cams, ls heads etc CHEAP
Name: George
Location: 757
Means of contact: post up here only
Price: $see below, all prices OBO
CAMS GONE
Description:
B20z2 block: $250
The block has bad rod bearings, I just don't have time or patience to fix it, It is complete, from oil pan, to pistons. Everything is there to make this work as a b20vtec or b20 motor, I just don't care anymore.
Name: George
Location: 757
Means of contact: post up here only
Price: $see below, all prices OBO
CAMS GONE
Description:
B20z2 block: $250
The block has bad rod bearings, I just don't have time or patience to fix it, It is complete, from oil pan, to pistons. Everything is there to make this work as a b20vtec or b20 motor, I just don't care anymore.
Thread
Thread Starter
Forum
Replies
Last Post
bboyoracle
Engine / Exhaust / Drivetrain
6
02-27-2010 06:53 AM
PAWESOME
Engine / Exhaust / Drivetrain
4
04-01-2009 07:18 PM
H23A1 Prelude
Engine / Exhaust / Drivetrain
4
03-23-2009 12:08 PM