built k24/k20 swap with 2k miles
#1
Registered Member
Thread Starter
Join Date: Jun 2007
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
built k24/k20 swap *needs exhaust valves*
Name: don
Location: nova
Means of contact: pm
Price: longblock was 5000 now taking offers
Description:
built k24/k20 complete swap with 980 miles
motor is still in the car as of now which is also for trade check my other posts, id like to keep the swap together for 7k, or for the right price ill split the trans. Or i will trade for a k20z1 plus cash.
made 279whp 211tq dynojet on stock rbc and stock tb at 25degrees on 93 octane, will easily break 300whp
k20z3 head brand new
super tech valves
super tech retainers
ebaich valve springs
all new valve seals
toruku race cams (only 1 of 4 sets and they all made 300whp )
apr head studs
as of now will come with prc mani and stock tb unless i change it out
Rc 440 injectors
k24a4 bottom end 87.5 and 12.5 compression
ips spec je pistons
brian crower rods
balanced crank
All new main and rod bearing along with a new rear main seal
Type-s oil pump and baffle
type-s oil pan
Brand new timing chain, guides, and tensioner
comet head gasket
k20z1 Tranny with 12000 miles on it, and 980 on the parts below
4.7 final drive
clutchmasters stage 3 carbon cevlar clutch
clutchmasters light weight flywheel
kazz 1.5 way diff
And a few other parts for sale only if the motor sells
ssr/dtr 4-2-1 header to custom electronic cutout w/wireless romote, to stock exhaust with no cat
dss 2.9 axles
k-pro with 02-04 ecu with jumper harness and 02 sensor
Location: nova
Means of contact: pm
Price: longblock was 5000 now taking offers
Description:
built k24/k20 complete swap with 980 miles
motor is still in the car as of now which is also for trade check my other posts, id like to keep the swap together for 7k, or for the right price ill split the trans. Or i will trade for a k20z1 plus cash.
made 279whp 211tq dynojet on stock rbc and stock tb at 25degrees on 93 octane, will easily break 300whp
k20z3 head brand new
super tech valves
super tech retainers
ebaich valve springs
all new valve seals
toruku race cams (only 1 of 4 sets and they all made 300whp )
apr head studs
as of now will come with prc mani and stock tb unless i change it out
Rc 440 injectors
k24a4 bottom end 87.5 and 12.5 compression
ips spec je pistons
brian crower rods
balanced crank
All new main and rod bearing along with a new rear main seal
Type-s oil pump and baffle
type-s oil pan
Brand new timing chain, guides, and tensioner
comet head gasket
k20z1 Tranny with 12000 miles on it, and 980 on the parts below
4.7 final drive
clutchmasters stage 3 carbon cevlar clutch
clutchmasters light weight flywheel
kazz 1.5 way diff
And a few other parts for sale only if the motor sells
ssr/dtr 4-2-1 header to custom electronic cutout w/wireless romote, to stock exhaust with no cat
dss 2.9 axles
k-pro with 02-04 ecu with jumper harness and 02 sensor
Last edited by jdmdc5; 06-08-2012 at 06:32 AM.
#6
Registered Member
Thread Starter
Join Date: Jun 2007
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered Member
Thread Starter
Join Date: Jun 2007
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts