Built, Forged 9:1 B16A Turbo-Ready Complete Shortblock
01-08-2013, 08:08 PM
#1
Registered Member
Thread Starter
Join Date: Jul 2011
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Built, Forged 9:1 B16A Turbo-Ready Complete Shortblock
SOLD
Name: Toby Cook
Location: Chambersburg, PA
Means of contact: PM
Price: $900 picked-up
Selling a complete, built B16A shortblock that has less than 5,000 miles since the time of the build. Here are the details:
Stock-sleeve / stock-bore B16A block
B17 crank
Eagle rods
Custom JE pistons w/ wrist-pins moved up slightly on the skirt (9:1)
ARP hardware / head studs
Nice OEM oil pan tapped w/ a 10AN bung for oil return
Factory black box hole capped w/ full-race plug
Oil and water-pump were new at the time of the build
Clutch / flywheel + alternator not included with the sale. This is a VERY healthy shortblock, and it is otherwise good to go. Cylinder walls are clean/clear of defect. I ran this motor in my eg hatch that recently made 515whp on 93 octane and 20lbs, which is very impressive for a stock-bore/stock-sleeve B16 setup. There are several people that can vouch for how solid this motor is.
Price is $900 firm and picked-up.
Thank you
Pic from the setup:
Dyno video of the setup and 515whp pull:
http://youtu.be/prnZB94sDoI
Name: Toby Cook
Location: Chambersburg, PA
Means of contact: PM
Price: $900 picked-up
Selling a complete, built B16A shortblock that has less than 5,000 miles since the time of the build. Here are the details:
Stock-sleeve / stock-bore B16A block
B17 crank
Eagle rods
Custom JE pistons w/ wrist-pins moved up slightly on the skirt (9:1)
ARP hardware / head studs
Nice OEM oil pan tapped w/ a 10AN bung for oil return
Factory black box hole capped w/ full-race plug
Oil and water-pump were new at the time of the build
Clutch / flywheel + alternator not included with the sale. This is a VERY healthy shortblock, and it is otherwise good to go. Cylinder walls are clean/clear of defect. I ran this motor in my eg hatch that recently made 515whp on 93 octane and 20lbs, which is very impressive for a stock-bore/stock-sleeve B16 setup. There are several people that can vouch for how solid this motor is.
Price is $900 firm and picked-up.
Thank you
Pic from the setup:
Dyno video of the setup and 515whp pull:
http://youtu.be/prnZB94sDoI
Last edited by tscook3; 01-18-2013 at 10:59 AM.
01-10-2013, 03:45 PM
#5
MOAR REP PLZ
Join Date: Feb 2006
Posts: 3,292
Likes: 0
Received 0 Likes
on
0 Posts
Re: Built, Forged 9:1 B16A Turbo-Ready Complete Shortblock
It doesn't matter if you bump by a minute or 8 minutes. Bumping is bumping.
On the serious though, very nice setup and great price! It's hard to come by a decent and reliable built block now a days! GLWS!
On the serious though, very nice setup and great price! It's hard to come by a decent and reliable built block now a days! GLWS!
