built boosted type r ek part out check it tons parts built long block
#1
Registered Member
Thread Starter
Join Date: Jun 2009
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
built boosted type r ek part out check it tons parts built long block
Name: Pat
Location: Norfolk, V.A.
Means of contact: 6038922734
Price: see part will trade or entertain trades for cars on long block.
Description: B18C type-R longblock bored to 82mm. has blox block guard, Wiseco 8:1 compression forged pistons, Eagle H-Beam rods, ARP rod studs,crank was micro polished and balanced. has a PR3 Type-R head, P&P. Supertech valves, springs, and retainers. Type-R cams and a blue Gates timing belt. J.G. Edelbrock Intake manifold w/ hondata intake mani. gasket and a 70mm Skunk2 throttle body,bored to 72mm. AEM fuel rail with AEM fuel pressure regulator and oil filled gauge(silver in color). more specific engine parts/mods/bolt on's will be listed below. Engine has 1300 miles on it and creates 453 horsepower under 13 P.S.I. boost.(everything is original with matching numbers
Longblock and PR3 Head-$3,500(has like 7grand worth of work/parts into it.)
JG Edelbrock intake manifold-$250
Skunk2 throttle body-$250
AEM fuel rail,pres. reg. and gauge-$140
Big ass XS-power intercooler with piping and HKS SSQ blow off valve-$150
MSD Ignition Box-$100
4bar MAP Sensor-$100
Stainless Steel feed line-$40
Brand new Bosch distributor-$100
GSR Transmition- $500
ACT 6 puck heavy duty clutch-$150
9 lb. flywheel- $75(will sell both the clutch and flywheel together for $200)
No reasonable offer turn down
Location: Norfolk, V.A.
Means of contact: 6038922734
Price: see part will trade or entertain trades for cars on long block.
Description: B18C type-R longblock bored to 82mm. has blox block guard, Wiseco 8:1 compression forged pistons, Eagle H-Beam rods, ARP rod studs,crank was micro polished and balanced. has a PR3 Type-R head, P&P. Supertech valves, springs, and retainers. Type-R cams and a blue Gates timing belt. J.G. Edelbrock Intake manifold w/ hondata intake mani. gasket and a 70mm Skunk2 throttle body,bored to 72mm. AEM fuel rail with AEM fuel pressure regulator and oil filled gauge(silver in color). more specific engine parts/mods/bolt on's will be listed below. Engine has 1300 miles on it and creates 453 horsepower under 13 P.S.I. boost.(everything is original with matching numbers
Longblock and PR3 Head-$3,500(has like 7grand worth of work/parts into it.)
JG Edelbrock intake manifold-$250
Skunk2 throttle body-$250
AEM fuel rail,pres. reg. and gauge-$140
Big ass XS-power intercooler with piping and HKS SSQ blow off valve-$150
MSD Ignition Box-$100
4bar MAP Sensor-$100
Stainless Steel feed line-$40
Brand new Bosch distributor-$100
GSR Transmition- $500
ACT 6 puck heavy duty clutch-$150
9 lb. flywheel- $75(will sell both the clutch and flywheel together for $200)
No reasonable offer turn down
#8
Registered Member
Thread Starter
Join Date: Jun 2009
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Re: built boosted type r ek part out check it tons parts built long block
Text me for pics only thread u hafta have pics is cars rims n bikes. but but if it makes a difference I'll post them in am.
Thread
Thread Starter
Forum
Replies
Last Post
lurknasty
Engine / Exhaust / Drivetrain
9
09-20-2011 03:39 PM
Slo_jspec
Part Outs
10
06-13-2011 10:36 AM
96b18c-r
Part Outs
10
10-16-2010 11:35 PM