bare b18a1 bottom end 81.5mm
#1
Registered Member
Thread Starter
Join Date: Oct 2006
Posts: 2,289
Likes: 0
Received 0 Likes
on
0 Posts
bare b18a1 bottom end 81.5mm
pj walters
waynesboro
pm me or this thread
$100
$200 with pistons and rods
hey fellow vadriven members i have up for sale a bare b18a1 bottom end that has been honed to 81.5mm the cylinder walls are in great shape have barely any rust. they bottom end would be perfect for an ls/vtec build at 81.5mm. i also have a set of wiseco 11.5/1 pistons to match the bottom end. they were used for about 7k to 8k miles and still have to ceramic coating on the side of the piston. the pistons also have ls rods on them and all the wrist pins. i have the orignal box so if you need to order rings you still have the part number. I DO NOT HAVE NONE OF THE ROTATING ASSEMBLY. i do have a tensioner and oil pump to go with it too.
if anybody is intrested just leave me a message and i will get back to you.
waynesboro
pm me or this thread
$100
$200 with pistons and rods
hey fellow vadriven members i have up for sale a bare b18a1 bottom end that has been honed to 81.5mm the cylinder walls are in great shape have barely any rust. they bottom end would be perfect for an ls/vtec build at 81.5mm. i also have a set of wiseco 11.5/1 pistons to match the bottom end. they were used for about 7k to 8k miles and still have to ceramic coating on the side of the piston. the pistons also have ls rods on them and all the wrist pins. i have the orignal box so if you need to order rings you still have the part number. I DO NOT HAVE NONE OF THE ROTATING ASSEMBLY. i do have a tensioner and oil pump to go with it too.
if anybody is intrested just leave me a message and i will get back to you.
Last edited by LSD_Moe_Lester; 08-13-2009 at 04:57 AM.