B20vtec swap Built
#2
Re: B20vtec swap Built
chris.
you still have the turbo and where are you located? hit me on my cell at 2023697588
you still have the turbo and where are you located? hit me on my cell at 2023697588
Name: Chris
Location: NOVA
Means of contact: Post or PM
Price: $3,000 or 3,500 with S300, ORRR get an EK shell with GSR blades and all of this for 4,000....check my shell thread for pics!
OR I CAN THROW THE HEAD ON AN LS BLOCK AND SELL FOR 2K and 2.5K WITH S300
Description: I am selling all my car shit because I got my 2nd DUI in 5 years and can't drive for another 2 years so no need for my build I have been working on. I have hasport mounts, and haspot shiftlinkage for an EK civic. Motor just reassembled by a machine shop near me.
Turbo Parts:
Precision 6262 turbo (Needs new seals) it is $180 from precision
3 inch down pipe with vband clamp.
Head: GSR
Carbon Spark Plug Cover
Supertech valve springs and TI retainers
Supertech valves
Supertech valve guides
Supertech valve seals
Edelbrock victor X intake mani
Edelbrock 70mm TB
Buddy Club Spec 3 cams
Buddy Club cam gears
ARP head studs
Intake
RMF replica header
Golden Eagle fuel rail
Blox Fuel Pressure Regulator
NGK Spark Plug Wires
Golden Eagle B20Vtec Kit
Block: B20
Stock Bore 84mm
Arias 9:1 Comp Pistons
Eagle H Beam Rods
ARP Rod bolts
ARP Main Studs
Type r water pump
ACL Main Bearings
ACL Rod Bearings
Trans: B16
Quaife LSD
Competition Stage 2 Clutch
8lb Flywheel
ARP Flywheel Bolts
ARP Pressure Plate Bolts
Dont have pictures of finished block, have to go to garage and take some
Location: NOVA
Means of contact: Post or PM
Price: $3,000 or 3,500 with S300, ORRR get an EK shell with GSR blades and all of this for 4,000....check my shell thread for pics!
OR I CAN THROW THE HEAD ON AN LS BLOCK AND SELL FOR 2K and 2.5K WITH S300
Description: I am selling all my car shit because I got my 2nd DUI in 5 years and can't drive for another 2 years so no need for my build I have been working on. I have hasport mounts, and haspot shiftlinkage for an EK civic. Motor just reassembled by a machine shop near me.
Turbo Parts:
Precision 6262 turbo (Needs new seals) it is $180 from precision
3 inch down pipe with vband clamp.
Head: GSR
Carbon Spark Plug Cover
Supertech valve springs and TI retainers
Supertech valves
Supertech valve guides
Supertech valve seals
Edelbrock victor X intake mani
Edelbrock 70mm TB
Buddy Club Spec 3 cams
Buddy Club cam gears
ARP head studs
Intake
RMF replica header
Golden Eagle fuel rail
Blox Fuel Pressure Regulator
NGK Spark Plug Wires
Golden Eagle B20Vtec Kit
Block: B20
Stock Bore 84mm
Arias 9:1 Comp Pistons
Eagle H Beam Rods
ARP Rod bolts
ARP Main Studs
Type r water pump
ACL Main Bearings
ACL Rod Bearings
Trans: B16
Quaife LSD
Competition Stage 2 Clutch
8lb Flywheel
ARP Flywheel Bolts
ARP Pressure Plate Bolts
Dont have pictures of finished block, have to go to garage and take some