b16 head w/supertech valvetrain
01-18-2009, 07:15 PM
#1
Registered Member
Thread Starter
Join Date: May 2008
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
b16 head w/supertech valvetrain
used b16 head with supertech valvesprings/retainers.
Head is toast unless you get new valves and get head welded and fixed,but valvetrain is still fine. head of a valve melted off and was bouncing around in the cylinder,so cylinder 1 is gouged up. can be fixed or used for parts,but i just went ahead and bought a better built head.
throw me offers,i might take them
Head is toast unless you get new valves and get head welded and fixed,but valvetrain is still fine. head of a valve melted off and was bouncing around in the cylinder,so cylinder 1 is gouged up. can be fixed or used for parts,but i just went ahead and bought a better built head.
throw me offers,i might take them
01-19-2009, 06:50 AM
#4
Registered Member
Thread Starter
Join Date: May 2008
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 head w/supertech valvetrain
sorry young,top cash offer is 100 bucks.....
im located in fredericksburg.
All the other valves are "fine" except for the one that was melted. Why i say "fine" is if one melted...im pretty sure others are close to that point. So if your going to reuse the head and not use it for parts,i would just go ahead and change ALL the valves...or atleast take them out and inspect them.
The head has just been sitting...and im tired of looking at it. lol. i just want it GONE.
im located in fredericksburg.
All the other valves are "fine" except for the one that was melted. Why i say "fine" is if one melted...im pretty sure others are close to that point. So if your going to reuse the head and not use it for parts,i would just go ahead and change ALL the valves...or atleast take them out and inspect them.
The head has just been sitting...and im tired of looking at it. lol. i just want it GONE.
