B16 - Built for Boost - Longblock
01-11-2010, 04:23 PM
#1
RND 2
Thread Starter
Join Date: Dec 2007
Location: 757
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
B16 Longblock / Wiseco / Eagle / 81.5
Name: RJ
Location: Portsmouth
Means of Contact: PM or text
Number: 679-5142
KEEP ALL NEGATIVE COMMENTS TO YOURSELF.
I am selling this motor to help pay for another car being that my car is totaled. It was a project that unfortunately wasn't able to be finished. Motor runs like a top. TRANNY IS NOT INCLUDED.!!! Serious buyers only. No lowballers welcome.
***PRICE CHANGE $1500 OBO***
flexible on price. PAGE UPDATED 2/24/10
Miles: 12,xxx
Motor was milled, tapered, hot tanked, etc. by Abacus.
It is also bored to 81.5 mm.
Internals:
- Wiseco 8.5:1 Pistons
- Eagle H-Beam Rods
- REV Springs and Retainers
- ACL Bearings
- Stage 3 F1 eBay clutch
- 10 lb exedy flywheel
- BDL Block Guard
- New OEM valves
- New OEM gaskets
- New OEM seals
- New OEM water pump
- New OEM Timing Belt
- New OEM Oil Pump
- DSM 550cc injectors
Also Includes:
-stock 99-00 si ecu
-255 walbro fuel pump
-mounts
-shift linkage
I'm sure I am forgetting a few things this is what I can think of for now.
Motor was NEVER ran on boost and the oil was changed every 3,000 miles.
I have paperwork for the internals on the motor.
The bad:
Motor has a small leak due to vtec solenoid gasket. Needs new IAC.
Here are a couple pics I just took. Sorry they're at night and look like shit.
Location: Portsmouth
Means of Contact: PM or text
Number: 679-5142
KEEP ALL NEGATIVE COMMENTS TO YOURSELF.
I am selling this motor to help pay for another car being that my car is totaled. It was a project that unfortunately wasn't able to be finished. Motor runs like a top. TRANNY IS NOT INCLUDED.!!! Serious buyers only. No lowballers welcome.
***PRICE CHANGE $1500 OBO***
flexible on price. PAGE UPDATED 2/24/10
Miles: 12,xxx
Motor was milled, tapered, hot tanked, etc. by Abacus.
It is also bored to 81.5 mm.
Internals:
- Wiseco 8.5:1 Pistons
- Eagle H-Beam Rods
- REV Springs and Retainers
- ACL Bearings
- Stage 3 F1 eBay clutch
- 10 lb exedy flywheel
- BDL Block Guard
- New OEM valves
- New OEM gaskets
- New OEM seals
- New OEM water pump
- New OEM Timing Belt
- New OEM Oil Pump
- DSM 550cc injectors
Also Includes:
-stock 99-00 si ecu
-255 walbro fuel pump
-mounts
-shift linkage
I'm sure I am forgetting a few things this is what I can think of for now.
Motor was NEVER ran on boost and the oil was changed every 3,000 miles.
I have paperwork for the internals on the motor.
The bad:
Motor has a small leak due to vtec solenoid gasket. Needs new IAC.
Here are a couple pics I just took. Sorry they're at night and look like shit.
Last edited by em1dude; 02-26-2010 at 09:28 AM.
01-12-2010, 05:43 AM
#2
Registered Member
Join Date: Aug 2008
Location: MINNISOTA/PORTSMOUTH
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 **Built for Boost** Longblock
VOUCHE FOR THIS MOTOR VERY POWERFUL AND DEFINATLY RELIABLE. FREE BUMP. BUY A PRELUDE AND ALL YOUR WORRIES WILL DISAPPEAR
