B-series Turbo Part out!!! (CHEAP)
#1
Registered Member
Thread Starter
Join Date: Apr 2009
Location: Miami FL/ Raleigh,NC
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
B-series Turbo Part out!!! (CHEAP)
Name: Willard
Location: Raleigh, NC
Means of contact: pm or call/txt 919-604-3132
Price.... below
Description: Have a bunch of parts laying around from my old turbo integra i'm parting out. Just about all the parts are name brand, good condition, work great! I am paypal certified. Prices "DON'T" include shipping. NO TRADES UNLESS IT's a 08 CBR 1000RR
RC750cc Saturated Injectors i.e. No Resistor Box Needed (SH4 Model) These aren't the model that is prone to lock up at higher fuel pressures. Asking $230
Apex-i AVCR Boost Controller, this controller works perfect. just missing a little harness for it, which you can buy directly from Apex-i for $29.99.... Link below
http://apexi-usa.com/shop/index.php/...cs-access.html
ASKING $250
Defi Racer Blue Gauges- missing a few harness wires for both of these as well
Boost Gauge- asking $100
Oil Pressure Gauge asking $115 (have external pressure sensor harness for it)
Chipped B-series ECU, RLZ Tuned Map (crome) for a Turbo GSR setup on 750cc injectors, 4 Bar Map, 60-1, etc blah blah blah asking- $100
Spoolin Performance Mini-Ram Manifold, promotes fast spool with good top end power!! has 38mm wastegate flange asking $375
Tial Purple 38mm wastegate (13psi wastegate spring) $180
94-01 DC2 Intercooler/Charge piping, mandrel bent with mild steel piping, huge FMIC- asking $240 for entire setup minus Greddy Type S BOV.
Greddy Type S Blow off Valve- Works great, sounds good
asking $125
Built Hmotorsonline GSR head, brian crower valve springs/retainers, ferrera valves, gsr cams, AEBS intake manifold, wrinkle red valve cover. no dizzy asking $700
Hmotorsonline OBD1 gsr dizzy $100
Location: Raleigh, NC
Means of contact: pm or call/txt 919-604-3132
Price.... below
Description: Have a bunch of parts laying around from my old turbo integra i'm parting out. Just about all the parts are name brand, good condition, work great! I am paypal certified. Prices "DON'T" include shipping. NO TRADES UNLESS IT's a 08 CBR 1000RR
RC750cc Saturated Injectors i.e. No Resistor Box Needed (SH4 Model) These aren't the model that is prone to lock up at higher fuel pressures. Asking $230
Apex-i AVCR Boost Controller, this controller works perfect. just missing a little harness for it, which you can buy directly from Apex-i for $29.99.... Link below
http://apexi-usa.com/shop/index.php/...cs-access.html
ASKING $250
Defi Racer Blue Gauges- missing a few harness wires for both of these as well
Boost Gauge- asking $100
Oil Pressure Gauge asking $115 (have external pressure sensor harness for it)
Chipped B-series ECU, RLZ Tuned Map (crome) for a Turbo GSR setup on 750cc injectors, 4 Bar Map, 60-1, etc blah blah blah asking- $100
Spoolin Performance Mini-Ram Manifold, promotes fast spool with good top end power!! has 38mm wastegate flange asking $375
Tial Purple 38mm wastegate (13psi wastegate spring) $180
94-01 DC2 Intercooler/Charge piping, mandrel bent with mild steel piping, huge FMIC- asking $240 for entire setup minus Greddy Type S BOV.
Greddy Type S Blow off Valve- Works great, sounds good
asking $125
Built Hmotorsonline GSR head, brian crower valve springs/retainers, ferrera valves, gsr cams, AEBS intake manifold, wrinkle red valve cover. no dizzy asking $700
Hmotorsonline OBD1 gsr dizzy $100
Thread
Thread Starter
Forum
Replies
Last Post
p2r
Engine / Exhaust / Drivetrain
32
02-16-2010 04:40 PM