5spd JDM B16A swap with built bottom for h22a swap 5spd
#1
Registered member
Thread Starter
Join Date: Aug 2006
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
5spd JDM B16A swap with built bottom for h22a swap 5spd
Name: Clayton
Location: Newport News
contact: clayton.moats@gmail.com
757-870-7866
complete swap is JDM, built bottom end with eagle rods and weisco pistons, stock intake manifod with the stock b16 throttle body, type R header, a bored out gsr throttle body(extra) and a bare type R intake manifold(extra),, and on the side a bare B20 block freshly sand blasted(extra), and the stock crank rods and pistons in a box on the side for your convenience if you want to build the block
ecu is chipped and tuned to 8k with launch control at 5400, vtec hits at 4800
always good for a re-tune in a different shell.
motor runs very strong the 3rd gear is starting that B series grind
have only ran premium gasoline and synthetic oil since i got it. BG oil is in there now 5w-30. well taken care of.
entertain me with trades and for the extra stuff, some money on top.
Location: Newport News
contact: clayton.moats@gmail.com
757-870-7866
complete swap is JDM, built bottom end with eagle rods and weisco pistons, stock intake manifod with the stock b16 throttle body, type R header, a bored out gsr throttle body(extra) and a bare type R intake manifold(extra),, and on the side a bare B20 block freshly sand blasted(extra), and the stock crank rods and pistons in a box on the side for your convenience if you want to build the block
ecu is chipped and tuned to 8k with launch control at 5400, vtec hits at 4800
always good for a re-tune in a different shell.
motor runs very strong the 3rd gear is starting that B series grind
have only ran premium gasoline and synthetic oil since i got it. BG oil is in there now 5w-30. well taken care of.
entertain me with trades and for the extra stuff, some money on top.
Thread
Thread Starter
Forum
Replies
Last Post
tarron.shelton
Import - ASIA
27
08-25-2008 10:45 AM