4G63 running motor and DSM parts
12-29-2008, 03:09 PM
#1
❒Good ❒ Better ✔Best
Thread Starter
Join Date: Nov 2002
Location: Fredericksburg
Posts: 4,598
Likes: 0
Received 0 Likes
on
0 Posts
4G63 running motor and DSM parts
SOLD - 6 Bolt 4G63 motor complete out of running car - $500
(I AM willing to split the block and head if i get a fair offer for the assembled bottom end by itself)
SOLD - 6-Bolt Manley I-Beam Rods (these are the 800+whp rated ones) brand new in box - $600
Engine Wire Harness, 91-94 - $75
2 gauge pillar pod, 1G, 60mm - $20
91 AWD Manual trans - $200
2G exhaust manifold heavily ported - $75
SOLD - T3 .63 5 bolt GT35R turbine housing - $150
T3 .82 5 bolt GT35R turbine housing - $150
T3 5 bolt O2 housing w/ Tial 35/38 flange - $100
Tial 35mm wastegate - $150
Mitsu/T3 Adapter plate (for bolting T3 5 bolt onto stock style DSM manifold) - $75
The T3 stuff above is has made 650+ whp.
JMF "Race" Intake manifold; stock TB flange, polished, w/ NOS bungs for direct port (This is over $600 new) - $425
I also have misc parts required for swapping an MT into an AT car.
Willing to trade for auto parts or sell outright.
Looking for Auto AWD transmissions, parts, and transfer cases. Also looking for legit Tial BOV.
(I AM willing to split the block and head if i get a fair offer for the assembled bottom end by itself)
SOLD - 6-Bolt Manley I-Beam Rods (these are the 800+whp rated ones) brand new in box - $600
Engine Wire Harness, 91-94 - $75
2 gauge pillar pod, 1G, 60mm - $20
91 AWD Manual trans - $200
2G exhaust manifold heavily ported - $75
SOLD - T3 .63 5 bolt GT35R turbine housing - $150
T3 .82 5 bolt GT35R turbine housing - $150
T3 5 bolt O2 housing w/ Tial 35/38 flange - $100
Tial 35mm wastegate - $150
Mitsu/T3 Adapter plate (for bolting T3 5 bolt onto stock style DSM manifold) - $75
The T3 stuff above is has made 650+ whp.
JMF "Race" Intake manifold; stock TB flange, polished, w/ NOS bungs for direct port (This is over $600 new) - $425
I also have misc parts required for swapping an MT into an AT car.
Willing to trade for auto parts or sell outright.
Looking for Auto AWD transmissions, parts, and transfer cases. Also looking for legit Tial BOV.
Last edited by HighPSI TSi Guy; 04-30-2009 at 12:40 AM.
03-21-2009, 01:48 AM
#4
❒Good ❒ Better ✔Best
Thread Starter
Join Date: Nov 2002
Location: Fredericksburg
Posts: 4,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4G63 running motor and DSM parts
$450 for the motor limited time only...
you cheap fucks.
Sometimes I wonder how anyone stays in business selling car parts?
you cheap fucks.
Sometimes I wonder how anyone stays in business selling car parts?
04-04-2009, 04:39 PM
#8
Registered member
Join Date: Jan 2007
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4G63 running motor and DSM parts
how much you want for the short block if you part it? pretty much everything below the head, ie loaded block, oil pump, pan, and pickup and whatever else is there.
04-05-2009, 07:52 PM
#10
❒Good ❒ Better ✔Best
Thread Starter
Join Date: Nov 2002
Location: Fredericksburg
Posts: 4,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4G63 running motor and DSM parts
I don't, but I think GSXtuner on here has one, PM him.
Never drove the car, trans seems ok though, as far as I can tell. Previous owner claims it shifted fine. I'm on the fence whether or not I believe him. It did shift last time I rode with him in the car, but that was 6 months before the car was parted out. So I can't say for sure. It's not broken by any means but it works as good or better than any trans you're gonna get for the price i'm sure.
Never drove the car, trans seems ok though, as far as I can tell. Previous owner claims it shifted fine. I'm on the fence whether or not I believe him. It did shift last time I rode with him in the car, but that was 6 months before the car was parted out. So I can't say for sure. It's not broken by any means but it works as good or better than any trans you're gonna get for the price i'm sure.
