350z 300hp vq35de engine
#1
Registered Member
Thread Starter
Join Date: Dec 2003
Location: Virginia Beach
Posts: 1,026
Likes: 0
Received 0 Likes
on
0 Posts
350z 300hp vq35de engine
TRANSMISSION SOLD
New price for everything without trans is 1580
Will trade for an S13 but prefer cash or complete S14 SRDET engine set.
Engine is from an 06 G35 6MT.
Things Not Included in the swap:
Alternator, PS pump, trans bolts, trans shifter, some clutch cover and fly bolts.
Things ARE included;
complete engine from top to bottom.
coils, all sensors, throttle body, MAF sensor(no actual intake , can get cheap
intake off ebay)
Unknown working G35 ECM(I think it from an 05, bottom line is that you can save
money if it works with the engine)
Starter
G37 trans, i've been reading and bellhousing pattern is different so you will need to swap it from a early model vq 6spd trans(plenty of bad ones you can get super cheap due to common synchro issues)
Trans slave cylinder
engine moutns,
headers
belts
all drive pulleys
ac compressor in unknown condition(must state that you want it or will not include)
Fluids, filters,
clutch disc 5k miles
pressure plate 5k miles old
throwout bearing part of slave cylinder.
This is all i can think of. Obvious things pictured were not mentioned.
New price for everything without trans is 1580
Will trade for an S13 but prefer cash or complete S14 SRDET engine set.
Engine is from an 06 G35 6MT.
Things Not Included in the swap:
Alternator, PS pump, trans bolts, trans shifter, some clutch cover and fly bolts.
Things ARE included;
complete engine from top to bottom.
coils, all sensors, throttle body, MAF sensor(no actual intake , can get cheap
intake off ebay)
Unknown working G35 ECM(I think it from an 05, bottom line is that you can save
money if it works with the engine)
Starter
G37 trans, i've been reading and bellhousing pattern is different so you will need to swap it from a early model vq 6spd trans(plenty of bad ones you can get super cheap due to common synchro issues)
Trans slave cylinder
engine moutns,
headers
belts
all drive pulleys
ac compressor in unknown condition(must state that you want it or will not include)
Fluids, filters,
clutch disc 5k miles
pressure plate 5k miles old
throwout bearing part of slave cylinder.
This is all i can think of. Obvious things pictured were not mentioned.
Last edited by Al_P; 02-16-2010 at 03:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post