**JDM LS Complete Swap!!** Axles, Ecu, Harness, Shifter, Etc......
#1
Registered Member
Thread Starter
Join Date: Aug 2008
Location: Elkton, va
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
**JDM LS Complete Swap!!** Axles, Ecu, Harness, Shifter, Etc......
Name: Eric
Location: Elkton, Va
Means of contact: Text (540)810-1994
Price: $1400/obo
Description: JDM LS with 80k miles, has never been ran hard. Bought it as a replacement for the stock motor. Oil has been changed every 3k miles with Mobil1 Full Synthetic 5W-30, and has only had 93 octane ran through it since it was installed. Also has an adjustable fuel pressure regulator, fuel pressure gauge that mounts on the fuel filter and 10.2mm plug wires. Ls trans, no grinds or popouts. Slave cylinder included. Filled with Pennzoil Synchromesh. Stage 1 clutch with an 11lb flywheel. Axles, half shaft, wiring harness, ecu, radiator with slim fan and coolant hoses, solid mounts all the way around, intake with filter, linkage and shifter. Any questions or concerns feel free to text me, thanks for looking!!
Pictures: [ATTACH=CONFIG]149476[/ATTACH]
Location: Elkton, Va
Means of contact: Text (540)810-1994
Price: $1400/obo
Description: JDM LS with 80k miles, has never been ran hard. Bought it as a replacement for the stock motor. Oil has been changed every 3k miles with Mobil1 Full Synthetic 5W-30, and has only had 93 octane ran through it since it was installed. Also has an adjustable fuel pressure regulator, fuel pressure gauge that mounts on the fuel filter and 10.2mm plug wires. Ls trans, no grinds or popouts. Slave cylinder included. Filled with Pennzoil Synchromesh. Stage 1 clutch with an 11lb flywheel. Axles, half shaft, wiring harness, ecu, radiator with slim fan and coolant hoses, solid mounts all the way around, intake with filter, linkage and shifter. Any questions or concerns feel free to text me, thanks for looking!!
Pictures: [ATTACH=CONFIG]149476[/ATTACH]
Last edited by lsintegra00; 08-15-2012 at 08:06 AM.
#2
Registered Member
Thread Starter
Join Date: Aug 2008
Location: Elkton, va
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Bump! Nothing wrong with this engine or trans, throw it in a car and go. I guarantee that it runs with no problems at all. I am even willing to write up some sort of bill of sale if someone would be more comfortable with that!
#4
Re: **JDM LS Complete Swap!!** Axles, Ecu, Harness, Shifter, Etc......
what year motor i need 96+! leaks? gaskets? and when you torqued down the flywheel and everything else did you use torque specs? also have you had the head off or anything else?! thanks
#5
Registered Member
Thread Starter
Join Date: Aug 2008
Location: Elkton, va
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure its a 99, ill have to double check when I get home. No leaks, no smoke, no ticking or anything. Yes, everything was torqued to spec. I have never had the motor apart, never had a reason to.