clontz_wi64

Zachary Clontz
Hillsville, va 234343
276-730-5749 txt or call anytime
92 s10 short bed regular cab
$4,000 with cheap aluminum rollers 5,000 with Salt Flats wheels that are on it in pictures

The truck is near finished... it does NOT have a complete exhaust, it only has shortys and collectors on it, and needs exterior bulbs and indicators for dash hasn't been installed



Clean title in hand. It is a SHORT BED, it kinda looks like a long bed in picture but its not, its short

I have a 1992 s10 for sale, i just have gotten it in running order, but im buying a house this year and need to dig my well and septic so this project will have to go.. I will sell with new wheels/tires 5,500 or with old set for 4,500

350 .030 over speed pro pistons/ vortec heads with arp screw in studs guide plates and comp beehives. dual plane intake, war hammer roller rockers, 670 street avenger that needs tuning, new headers headman. Th350 with new case and new clutches steels and street shift kit from transgo. New autometer gauges all working. brand new drive shaft made last week and installed with new straps and bolts. Brand new rear brakes with new summit drop leafs/blocks. New 2" drop spindles. New mastercraft tires/ and salt flat specials. I sell with old aluminum chevy wheels for cheaper. new lokar throttle cable. new summit coil/distributor, new wires, wire holders. new summit dual fans/radiator, heavy duty powermaster mini starter for high compression motors. brand navy carpet and sound deadener installed and b&m hammer shifter. practically everything on it is new and it has seen road time yet... the motor has been running for maybe 30-40 minutes for cam break in and hasn't even been tuned besides setting base timming... no leaks or squeaks. Also has new alternator belt and pulleys, just too much to list
i have the "350" emblems that are missing in the picture behind the headlight on the fender


this motor will easily make 350whp, modified vortecs will outflow any other gm 350 steel head. the 670 holley street avenger needs tuning and possibly needs to be jetted a little bigger it has 67 or 68 primary jet in it now

brand new carpet 140 dollars and brand new b&m shifter with lighted indicator

all the gauges work, alt charges great even at idle(3 wire), fuel level works perfect(facotory 0-90ohm) they are lighted with led bulbs

fresh u-bolts, all brand new rear brakes, new summit springs and shocks

new drive shaft cost me 240 to have made a month ago, new gastank straps and hoses

these are the cheaper aluminum wheels that can be used on sale/trade deal

dash indicators that haven't been installed yet will come with it

fresh bottom end

picture of top end before was completed

tuckin_nutz777

bump for a fellow s10 owner and love the wheels!

clontz_wi64

thanks..... wheels are for sale sepreately........ 850 with lugs

clontz_wi64

no hits, i'm gona crush it

playnwithguns

Check thread for bronco.

clontz_wi64

upp

daryl

does it have tail lights? in the picture it doesnt look like it. what rear end? what rpm stall? message me back or text/call 804-955-5216. I recently sold my s10 and miss it. I'm looking to get my hands on another one, this one looks like it has a good start

clontz_wi64

yes it has taillights, body is in good condition, couple rough spots and small rust holes in cab corners, no rust anywhere else.... forgot to mention it has brand new tailgate also. the rear end is stock 7.5 with brand new rear brakes and brand new drive shaft and u joint straps... the converter is ATI 2500 stall 8" with arp bolts. it really only needs the indicators in the gauge bezel and finish the exhaust and you can drive it, and tuning on the carb, the 670 holley isn't jetted big enough for it

clontz_wi64

but the motor is est. over 400 hp 10:1 comp
and I have over 700$ in head work alone, not including cost of the heads..... i can take more detailed pictures if you're really intrested and I can take a good quality video

clontz_wi64

will take better/recent pictures this week and link a video of it running