2001 Ford Mustang GT w/ built motor
05-12-2011, 04:12 PM
#1
Registered Member
Thread Starter
Join Date: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2001 Ford Mustang GT w/ built motor
Chris
Va Beach
Means of contact: ccaconway@gmail.com
Price: $9000 obo
Description: 2001 Ford Mustang GT
Built Motor
84,000 Miles on chasis and ~11,000 miles on the motor
Stage 1 ported and polished heads with Comp Cams 270XE and Comp Cam valve springs. Diamond Racing pistons, Manley H-Beam Rods, Clevite Rod bearings, Moroso 7qt oil pan with cobra oil pump.
Accufab Plenum and Accufab 75mm throttle body. Mac cold air intake. Mac long-tube headers, Mac 2.5" Prochamber, and Mac 2.5" cat back. Ford Focus SVT fuel pump. Spec stage 1 cltuch. FRPP 3.73 gears. UPR triple hook quadrant with OEM clutch cable. Infinity door and rear speakers. SCT 4-bank chip with custom tunes.
Black replica bullit wheels, 17 inch front wheels, 18 inch rear wheels, deep dish in the back. Nitto 555’s in the front (275/45/17) and BFG drag radials in the rear (315/30/18). These tires will need to be replaced. Interior gauges on driver side A-pillar, Auto Meter Oil pressure and Air/fuel ratio. Mach 1 front chin spoiler.
Car has some running problems right now. May be the fuel pressure regulator or MAF. Neither cost much to fix, but I just haven’t gotten around to the repairs. Car isn’t throwing codes and the oxygen sensors are brand new. Car does not have a current state inspection. Clear coat of the paint is peeling in some areas, most notably the driver side front fender. Rear bumper is a different color. Also there is a possible rear main seal leak.
Not interested in trades.
Pictures:
Va Beach
Means of contact: ccaconway@gmail.com
Price: $9000 obo
Description: 2001 Ford Mustang GT
Built Motor
84,000 Miles on chasis and ~11,000 miles on the motor
Stage 1 ported and polished heads with Comp Cams 270XE and Comp Cam valve springs. Diamond Racing pistons, Manley H-Beam Rods, Clevite Rod bearings, Moroso 7qt oil pan with cobra oil pump.
Accufab Plenum and Accufab 75mm throttle body. Mac cold air intake. Mac long-tube headers, Mac 2.5" Prochamber, and Mac 2.5" cat back. Ford Focus SVT fuel pump. Spec stage 1 cltuch. FRPP 3.73 gears. UPR triple hook quadrant with OEM clutch cable. Infinity door and rear speakers. SCT 4-bank chip with custom tunes.
Black replica bullit wheels, 17 inch front wheels, 18 inch rear wheels, deep dish in the back. Nitto 555’s in the front (275/45/17) and BFG drag radials in the rear (315/30/18). These tires will need to be replaced. Interior gauges on driver side A-pillar, Auto Meter Oil pressure and Air/fuel ratio. Mach 1 front chin spoiler.
Car has some running problems right now. May be the fuel pressure regulator or MAF. Neither cost much to fix, but I just haven’t gotten around to the repairs. Car isn’t throwing codes and the oxygen sensors are brand new. Car does not have a current state inspection. Clear coat of the paint is peeling in some areas, most notably the driver side front fender. Rear bumper is a different color. Also there is a possible rear main seal leak.
Not interested in trades.
Pictures:
Thread
Thread Starter
Forum
Replies
Last Post