frame slider install help
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Virginia Beach
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
frame slider install help
I bought a set of LSL frame sliders but don't have the technical know how to install. they require drilling of the fairings. Does anyone in the virginia beach area do Installs on sliders? If so how much and about how long would it take? Its for a 2005 ZZR 600 Thanks for the help
#2
Re: frame slider install help
02 ZX-6R frame sliders should fit your 05 ZZR. You can purchase the "NO-CUT" which are very easy and straight forward to install.
Or you can purchase these...http://cgi.ebay.com/ebaymotors/2005-...80903149r10805
Or you can purchase these...http://cgi.ebay.com/ebaymotors/2005-...80903149r10805
#3
Re: frame slider install help
it's very easy. you will need this tool. get the one that is closest in size to the sliders you have.
Here are some step by step instructions.
http://sportbikeguy.com/garage/floor/frameslider.html
Here are some step by step instructions.
http://sportbikeguy.com/garage/floor/frameslider.html
#4
Re: frame slider install help
02 ZX-6R frame sliders should fit your 05 ZZR. You can purchase the "NO-CUT" which are very easy and straight forward to install.
Or you can purchase these...http://cgi.ebay.com/ebaymotors/2005-...80903149r10805
Or you can purchase these...http://cgi.ebay.com/ebaymotors/2005-...80903149r10805
#9
sumospeedDOTcom
Join Date: Nov 2002
Location: Newport News
Posts: 9,891
Likes: 0
Received 0 Likes
on
0 Posts
#10
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: frame slider install help
remove fairing
remove motor mount bolt till it's almost all the way out
paint end of bolt with fingernail polish
loosely install fairing so that end of bolt just touches fairing
re-remove fairing
now you have a paint spot on the back of the fairing that is the center of the hole you need to cut
pretty simple.
remove motor mount bolt till it's almost all the way out
paint end of bolt with fingernail polish
loosely install fairing so that end of bolt just touches fairing
re-remove fairing
now you have a paint spot on the back of the fairing that is the center of the hole you need to cut
pretty simple.