VADriven.com Forums

VADriven.com Forums (https://www.vadriven.com/forums/)
-   Cycle Corner (https://www.vadriven.com/forums/cycle-corner-41/)
-   -   finished the Sixxer finally (https://www.vadriven.com/forums/cycle-corner-41/finished-sixxer-finally-482869/)

Prelude driver 04-04-2014 06:07 AM

finished the Sixxer finally
 
got these 2 together couple weeks ago, started on the gsxr first. looking to setup the r6 for track days. i havent touched that yet but im done with the gixxer.
http://www.customfighters.com/forums...0&d=1394297141

http://www.customfighters.com/forums...4&d=1394297179




then it was,

https://farm8.staticflickr.com/7409/...e010f9e2_b.jpg








and today. (the red one, black one already sold). new motor in it with 13k on it, lots of new parts, waiting on exhaust gasket and fairing bolt kit then going for a ride :) needs a bath too

https://farm8.staticflickr.com/7012/...d5eb1cc1_b.jpg


https://farm8.staticflickr.com/7031/...e938b21a_h.jpg

https://farm3.staticflickr.com/2867/...cf87761c_h.jpg

Scotty_Nooo 04-04-2014 06:13 AM

Re: finished the Sixxer finally
 
I'm looking for a R1 motor for a golf cart build, I have a feeling you could point me in the right direction...

92_SR20 04-04-2014 06:25 AM

Re: finished the Sixxer finally
 
Quite a change from old to new :P


Originally Posted by Scotty_Nooo (Post 8277041)
I'm looking for a R1 motor for a golf cart build, I have a feeling you could point me in the right direction...

The thought of that put a huge grin on my face. Make a build thread if you end up doing it. :thup:

Prelude driver 04-04-2014 01:13 PM

Re: finished the Sixxer finally
 

Originally Posted by Scotty_Nooo (Post 8277041)
I'm looking for a R1 motor for a golf cart build, I have a feeling you could point me in the right direction...

fuel injected or carbed? i can prob get my hands on a crossplane motor if thats what ur looking for but wont be cheap. 02-03 will be best bang for ur buck imo.

also does it have to be r1? or just any inline 4 liter motor. i got a cbr1000 that i just got running yesterday, i wouldnt be totally apposed to parting it if the motor is first thing to sell since its usually the hardest to sell cause of shipping.

Scotty_Nooo 04-04-2014 03:17 PM

Re: finished the Sixxer finally
 

Originally Posted by Prelude driver (Post 8277157)
fuel injected or carbed? i can prob get my hands on a crossplane motor if thats what ur looking for but wont be cheap. 02-03 will be best bang for ur buck imo.

also does it have to be r1? or just any inline 4 liter motor. i got a cbr1000 that i just got running yesterday, i wouldnt be totally apposed to parting it if the motor is first thing to sell since its usually the hardest to sell cause of shipping.

Nothing in particular, I said r1 b/c that's what was in the one on YouTube. I'm still trying to source a kart and find some plans on how to make this work still.

I think I'd need engine/trans/wiring harness from a bike. Where do you find all your flips if you don't mind my asking, pm me if you prefer.

Prelude driver 04-04-2014 04:37 PM

Re: finished the Sixxer finally
 

Originally Posted by Scotty_Nooo (Post 8277190)
Nothing in particular, I said r1 b/c that's what was in the one on YouTube. I'm still trying to source a kart and find some plans on how to make this work still.

I think I'd need engine/trans/wiring harness from a bike. Where do you find all your flips if you don't mind my asking, pm me if you prefer.

if i was u, i would do a 600rr motor, light, revs its ass off, cheap parts, and i have one that needs a rebuild that ill let go for cheap ;)

no i dont mind. i get them where i find them, Craigslist, auctions, connections. and im not scared to travel for a good deal.



just got my other sixxer running. 07 600 with 2400 miles on it. completely stock, even the reflectors are still on it. bought not running, drained old gas, replaced spark plugs then i put about 90 miles on it today.

some people said why i dont have a variety of motos so heres 3 of many

https://farm8.staticflickr.com/7322/...ba12f17e_h.jpg


All times are GMT -8. The time now is 03:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands