2003+ Cbr600rr question
#1
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
2003+ Cbr600rr question
The other day i started my bike and right after the initial start up my FI light flashes 3 times or so and cuts off. I was wondering if this is normal. I thought it only meant something if it stayed on solid. I just want to make sure. I dont know any help i would greatly appreciate it.
#2
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003+ Cbr600rr question
if it's not staying on i wouldn't worry about it too much, but if you really want to see whats going on, take it to a shop and have the codes read, if there are any.
#3
The Douche is here
Join Date: Feb 2006
Location: Lynchburg
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003+ Cbr600rr question
that means it you have a fault code and count it and makes sure.
0 - bank angle sensor, ECM, PGM-FI fuse
1 - MAP sensor
2 - MAP sensor vacuum hoses, or sensor itself
7 - ECT sensor poorly connected or open circuit
8 - TP sensor, TP senspr wiring
9 - IAT sensor connection, or open wire
10 - Baro sensor, or connection, or wiring
11 - Vehicle speed sensor, or connection or wiring
12 - #1 injector connection, or faulty injector
13 - #2 injectior connection or faulty injector
14 - #1 connection or open/shorted circuit
15 - #2 connection or open/shorted circuit
18 - Cam pulse sensor, connection or loose sensor
19 - Ignition pulse sensor, connection or loose sensor
20 - faulty E-PROM in ECM
0 - bank angle sensor, ECM, PGM-FI fuse
1 - MAP sensor
2 - MAP sensor vacuum hoses, or sensor itself
7 - ECT sensor poorly connected or open circuit
8 - TP sensor, TP senspr wiring
9 - IAT sensor connection, or open wire
10 - Baro sensor, or connection, or wiring
11 - Vehicle speed sensor, or connection or wiring
12 - #1 injector connection, or faulty injector
13 - #2 injectior connection or faulty injector
14 - #1 connection or open/shorted circuit
15 - #2 connection or open/shorted circuit
18 - Cam pulse sensor, connection or loose sensor
19 - Ignition pulse sensor, connection or loose sensor
20 - faulty E-PROM in ECM
#5
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003+ Cbr600rr question
Well i went to check it out today and i was wrong it doesnt flash it just stays like for not even a second and cuts off. I guess its just part of the bike starting up like in your car when some of your lights in your cluster come on and go off.
#7
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post