Want dual exhaust?
07-24-2006, 03:58 PM
#1
Registered Member
Thread Starter
Join Date: Jul 2003
Location: Norfolk
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Want dual exhaust?
I am looking for a Domestic car to show off some exhaust work on. If you have a car and would like a custom exhaust built for a good deal give me a call. I am only going to give this kind of deal to one person... I will want to shoot pictures of the work so that people on the board can see what my shop can do as far as exhaust work goes. I am always willing to give someone on the board a good deal on work but this is going to be a killer deal in my opinion.
My shop is on Midlothian a mile east of Chippenham Parkway. (If I misspelled those I don't care, I am not from this area)
Call me at the shop between 8:00 am and 5:30 pm.
804-230-6100
Ask for Ed and we will discuss what you drive and what you want.
My shop is on Midlothian a mile east of Chippenham Parkway. (If I misspelled those I don't care, I am not from this area)
Call me at the shop between 8:00 am and 5:30 pm.
804-230-6100
Ask for Ed and we will discuss what you drive and what you want.
07-24-2006, 06:45 PM
#3
Registered Member
Thread Starter
Join Date: Jul 2003
Location: Norfolk
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Want dual exhaust?
Originally Posted by jjkamikaze
what shop? i need exhaust bad. and it would be a custom type job.
Tuffy on Midlo, I manage it.
I have a good exhaust guy that has been doing it 20+ years working for me and promise you will be pleased with the work.
I know the company I work for doesn't have the best rep but give me a try, you will be taken care of.
On a side note, I won't do anything to someones car that is illegal, sorry.
07-25-2006, 12:38 PM
#6
Settled..
Join Date: Nov 2002
Location: Richmond,VA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Want dual exhaust?
I may get some 3in under my Womans car soon... Its a Mustang and will have an X-pipe and all. If you can do 3.5 in I would upgrade mine and give her my 3in setup.
07-25-2006, 04:22 PM
#7
Registered Member
Thread Starter
Join Date: Jul 2003
Location: Norfolk
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Want dual exhaust?
Originally Posted by RHD Soarer
do you guys do crush bent or mandrel?
Crush
Mandrel is just too much money and there is no way I can talk the owner into forking it out.
When I have the money to open my own shop I plan to get one, but I have ideas that will allow the bender to make money as well...
07-25-2006, 04:25 PM
#9
Registered Member
Thread Starter
Join Date: Jul 2003
Location: Norfolk
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Want dual exhaust?
Originally Posted by ICULOKN
I may get some 3in under my Womans car soon... Its a Mustang and will have an X-pipe and all. If you can do 3.5 in I would upgrade mine and give her my 3in setup.
Three is as high as I can go and I can't do more than forty-five degree bends. Most shops won't spend money on high-end benders because they don't think there is enough work needing bigger pipe. Commerical trucks usually use pre-bent elbows and don't care what it looks like, so all that is left is performance cars and some med/heavy duty trucks.
07-25-2006, 04:26 PM
#10
Registered Member
Thread Starter
Join Date: Jul 2003
Location: Norfolk
Posts: 4,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Want dual exhaust?
Originally Posted by jjkamikaze
thats why you just order your mandrel bends. that is the most economical way to do it. there is no need for the machine.
I can set it up to get pre-bent, I was just saying my bender only does crush.