A little update on my z32TT
#1
Registered member
Thread Starter
Join Date: Jan 2004
Location: Winchester
Posts: 3,972
Likes: 0
Received 0 Likes
on
0 Posts
A little update on my z32TT
Well do I have some updates.......
Motor has been out for awile, but now is on its way to starting back up shortly. We have been working on it when we can and lately a lot.. Peter has been very out going and wanting to accomplish this goal and to get her up and running. I dont know how many times I can say it, but truly thank you. On to the pics.
So the motor was out, parts were ordered, MSP Manifolds, Sport 700 turbos, New lines, Silicone hoses, new mounts, and the list goes on and on and on. So wile the motor was out it gave me plenty of time to do some cleaning and get some powder coating done. So lets check those pics out....
Then it was time for the parts to go on to the motor and get her back together...
Where she currently stands...
Few nights ago we put the trans back in, tightened down the mounts ect. On Sunday we hooked up the harness installed radiator and fan and power steering and AC, and starter. Now all that is left is adding fluid's trq down the crank pulley, put the last 2 bolts on the grounding strap in the middle bottom of the trans, put on the small radiator hose and 4 boost hoses to the TB and put the battery back in, fill with fluids, and fire.
-Jason
Motor has been out for awile, but now is on its way to starting back up shortly. We have been working on it when we can and lately a lot.. Peter has been very out going and wanting to accomplish this goal and to get her up and running. I dont know how many times I can say it, but truly thank you. On to the pics.
So the motor was out, parts were ordered, MSP Manifolds, Sport 700 turbos, New lines, Silicone hoses, new mounts, and the list goes on and on and on. So wile the motor was out it gave me plenty of time to do some cleaning and get some powder coating done. So lets check those pics out....
Then it was time for the parts to go on to the motor and get her back together...
Where she currently stands...
Few nights ago we put the trans back in, tightened down the mounts ect. On Sunday we hooked up the harness installed radiator and fan and power steering and AC, and starter. Now all that is left is adding fluid's trq down the crank pulley, put the last 2 bolts on the grounding strap in the middle bottom of the trans, put on the small radiator hose and 4 boost hoses to the TB and put the battery back in, fill with fluids, and fire.
-Jason
#6
Registered member
Thread Starter
Join Date: Jan 2004
Location: Winchester
Posts: 3,972
Likes: 0
Received 0 Likes
on
0 Posts
Re: A little update on my z32TT
SHES ALIVE!!!!!! Running well. Just need to put the exhaust back on, break her in, get her inspected and shes good to go.
Thread
Thread Starter
Forum
Replies
Last Post