2004 Mustang GT
12-12-2012, 09:02 PM
#1
Registered Member
Thread Starter
Join Date: Feb 2012
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
2004 Mustang GT
Foxbody has a dead cylinder so I got a new car...new to me. It's a 40th anniversary edition with 80k miles. Everything's pretty squeeky clean. Phone camera = 
so the driver's seat looks like someone shat all over it but it's just as clean as the rest of the car. No jean stains on the leather. 
Parts already on it:
- BBK cold air intake
- 75 mm throttle body
- C&L upper plenum
- BBK catted X pipe
- Borla Stinger cat back
- "93 octane" tune supposedly
- 4.10 gears
- Eibach Sportline springs
- Hancook V4 tires 245/45 and 275/40 (I think)
- Roush shifter
- Autometer gauge cluster
- Got a SCT tuner with it too. Have no idea how to use it yet...
- Mach 1 chin spoiler
Tentative plans:
- So much billet in there...found the original button caps and stuff in the center console.
- Remove iRoush and SCT badges
- Remove wiring clusterfuck from past HID's...probably from ebay.
- Probably remove all the window decals. Although the "mintyfresh' one on the windshield is quite amusing.
- KYB struts and shocks since stockers + lowering springs = bad
- Plastic intake with a heat shield
- BBK headers
- Intake manifold. Not sure which one yet...open to suggestions.
- Pioneer DEH-P7200HD head unit going in this one too. Love that thing.
- Mach 1 grill delete. I saw a skeleton pony recently and liked it. Is this a shitty idea or do others like it too?
- Tint strip on windshield and smoke the tails. Not murder out, just smoke.
I'm open to honest opinions, constructive criticism, haters, whatever the hell people call it.
so the driver's seat looks like someone shat all over it but it's just as clean as the rest of the car. No jean stains on the leather. Parts already on it:
- BBK cold air intake
- 75 mm throttle body
- C&L upper plenum
- BBK catted X pipe
- Borla Stinger cat back
- "93 octane" tune supposedly
- 4.10 gears
- Eibach Sportline springs
- Hancook V4 tires 245/45 and 275/40 (I think)
- Roush shifter
- Autometer gauge cluster
- Got a SCT tuner with it too. Have no idea how to use it yet...
- Mach 1 chin spoiler
Tentative plans:
- So much billet in there...found the original button caps and stuff in the center console.
- Remove iRoush and SCT badges
- Remove wiring clusterfuck from past HID's...probably from ebay.
- Probably remove all the window decals. Although the "mintyfresh' one on the windshield is quite amusing.
- KYB struts and shocks since stockers + lowering springs = bad
- Plastic intake with a heat shield
- BBK headers
- Intake manifold. Not sure which one yet...open to suggestions.
- Pioneer DEH-P7200HD head unit going in this one too. Love that thing.
- Mach 1 grill delete. I saw a skeleton pony recently and liked it. Is this a shitty idea or do others like it too?
- Tint strip on windshield and smoke the tails. Not murder out, just smoke.
I'm open to honest opinions, constructive criticism, haters, whatever the hell people call it.
12-12-2012, 09:13 PM
#3
Registered Member
Thread Starter
Join Date: Feb 2012
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2004 Mustang GT
but to each his own...
12-12-2012, 09:43 PM
#4
TwoWheels YearRound
Join Date: Mar 2010
Location: Inside the Beltway
Posts: 12,705
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2004 Mustang GT
Foxbody has a dead cylinder so I got a new car...new to me. It's a 40th anniversary edition with 80k miles. Everything's pretty squeeky clean. Phone camera = so the driver's seat looks like someone shat all over it but it's just as clean as the rest of the car. No jean stains on the leather.
Parts already on it:
- BBK cold air intake
- 75 mm throttle body
- C&L upper plenum
- BBK catted X pipe
- Borla Stinger cat back
- "93 octane" tune supposedly
- 4.10 gears
- Eibach Sportline springs
- Hancook V4 tires 245/45 and 275/40 (I think)
- Roush shifter
- Autometer gauge cluster
- Got a SCT tuner with it too. Have no idea how to use it yet...
- Mach 1 chin spoiler
Tentative plans:
- So much billet in there...found the original button caps and stuff in the center console.
- Remove iRoush and SCT badges
- Remove wiring clusterfuck from past HID's...probably from ebay.
- Probably remove all the window decals. Although the "mintyfresh' one on the windshield is quite amusing.
- KYB struts and shocks since stockers + lowering springs = bad
- Plastic intake with a heat shield
- BBK headers
- Intake manifold. Not sure which one yet...open to suggestions.
- Pioneer DEH-P7200HD head unit going in this one too. Love that thing.
- Mach 1 grill delete. I saw a skeleton pony recently and liked it. Is this a shitty idea or do others like it too?
- Tint strip on windshield and smoke the tails. Not murder out, just smoke.
I'm open to honest opinions, constructive criticism, haters, whatever the hell people call it.
so the driver's seat looks like someone shat all over it but it's just as clean as the rest of the car. No jean stains on the leather. Parts already on it:
- BBK cold air intake
- 75 mm throttle body
- C&L upper plenum
- BBK catted X pipe
- Borla Stinger cat back
- "93 octane" tune supposedly
- 4.10 gears
- Eibach Sportline springs
- Hancook V4 tires 245/45 and 275/40 (I think)
- Roush shifter
- Autometer gauge cluster
- Got a SCT tuner with it too. Have no idea how to use it yet...
- Mach 1 chin spoiler
Tentative plans:
- So much billet in there...found the original button caps and stuff in the center console.
- Remove iRoush and SCT badges
- Remove wiring clusterfuck from past HID's...probably from ebay.
- Probably remove all the window decals. Although the "mintyfresh' one on the windshield is quite amusing.
- KYB struts and shocks since stockers + lowering springs = bad
- Plastic intake with a heat shield
- BBK headers
- Intake manifold. Not sure which one yet...open to suggestions.
- Pioneer DEH-P7200HD head unit going in this one too. Love that thing.
- Mach 1 grill delete. I saw a skeleton pony recently and liked it. Is this a shitty idea or do others like it too?
- Tint strip on windshield and smoke the tails. Not murder out, just smoke.
I'm open to honest opinions, constructive criticism, haters, whatever the hell people call it.
12-13-2012, 04:19 AM
#8
DESTROYS DONUTS !!
Join Date: Nov 2002
Location: the seed has sprouted.
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2004 Mustang GT
I would set it on fire and then blast it with piss, but thats just me.
otherwise it looks like a pretty clean car, Im just not into these at all and I dont know why. They are not bad looking cars, this one looks pretty good and I have seen others that I have not been upset with. I just cant put my finger on why I dont like them, the interior however I hate, looks like regular ford shit and of course the quality of the interior is just a joke.
Im sure you will do a proper job though, make the car for you.
otherwise it looks like a pretty clean car, Im just not into these at all and I dont know why. They are not bad looking cars, this one looks pretty good and I have seen others that I have not been upset with. I just cant put my finger on why I dont like them, the interior however I hate, looks like regular ford shit and of course the quality of the interior is just a joke.
Im sure you will do a proper job though, make the car for you.
Last edited by MORE IMPATIENT; 12-13-2012 at 04:21 AM.
