gschott

What all do I need to make my ls a vtec

Vtec head
Vtec ecu
Ls vtec oil line kit


What else do I need and how do I do the head swap

dirty c

just like any other head swap except you wil need to tap and close off the oil drain hole on the head.You need the head bolts that go to the vtec head.

VroomVroom

golden eagle makes an ls/vtec kit that doesnt require tapping the block

NasTHatch

http://www.b20vtec.com/forums/b-seri...tec-guide.html

my88crxvtech

x2 also a good oil feed line kit. check kgparts.com they make a really nice complete kit that i have usedon every ls vtec i built its like 50 bucks and its not the crapy oil filter sandwich plate type. also you will need a b series vtec oil/water pump any one will do, there all the same b16/gsr/type-r.


*Edit you will also need a head gasket for the block you are using. Dont get it for the head

VroomVroom

no, go back to your vendor thread faggot

ShawnD

HONDA TECH . COM FAGGOT

NasTHatch

just click the link i posted it will tell you everything you need to know

KYLE ROSE

My88crxvtech go tell GE that you can't use a vtec headgasket on a ls vtec and report back Ge kits come with a vtec headgasket unless stated otherwise. Just so you don't spread more misinformation.

~Josh

This guy doesn't know what he's talking about....