How to disassemble CTR mirrors.
#1
Registered Member
Thread Starter
Join Date: Jul 2006
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
How to disassemble CTR mirrors.
I just got some ctr mirrors for my civic and I need to disassemble them so I can get them painted properly. I was able to find a few PDF's on how to do it with USDM mirrors but no luck for these. They aren't power folding, they are just power adjust/ manual fold. Any advice would be great, thanks.
#5
DESTROYS DONUTS !!
Join Date: Nov 2002
Location: the seed has sprouted.
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to disassemble CTR mirrors.
yep. although the wires/electircal connections will still be connected and youll either have to remove the guts of the mirror to get it undone, or just cut it and resolder it after paint.
#7
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to disassemble CTR mirrors.
pull it slowly, seriously,
there is a plastic clip/ball on the inside, and all you do is gently pull until it comes off, it takes less than 3 seconds
there is a plastic clip/ball on the inside, and all you do is gently pull until it comes off, it takes less than 3 seconds
#9
Registered Member
Thread Starter
Join Date: Jul 2006
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to disassemble CTR mirrors.
That's exactly it. They popped right off. I pushed the mirror in and popped it out from the outer side. Worked perfectly. I can't exactly go up to the store and get a new pair so I was scared to do it like that. Didn't want to break it. Thanks so much.
#10
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to disassemble CTR mirrors.
the worst part is breaking the plastic tab/clip that connects to the mirror, because then you have to have one shipped from somewhere, because they are not like the regular ek mirrors or the integra..