Electric Choke
01-22-2011, 11:20 AM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Norfolk,VA
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Electric Choke
Does anyone have a wire diagram on how to wire and electric choke on a Demon Carb? I have googled with no luck.
PS: I suck with electrical stuff, so any advice would be great
PS: I suck with electrical stuff, so any advice would be great
Last edited by aniretaKrace; 01-22-2011 at 11:22 AM.
01-22-2011, 11:23 AM
#2
Registered member
Join Date: Nov 2004
Posts: 6,252
Likes: 0
Received 0 Likes
on
0 Posts
Re: Electric Choke
If I remember, its a 1 wire to a T-stat switch and 1 to ground - I don't know what else it would need. I'd just wire in a switch on it and manually turn it on when its cold.
01-22-2011, 05:41 PM
#3
Registered member
Join Date: Sep 2003
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Re: Electric Choke
Actually a electric choke is a bi-metalic actuator that slowly opens the choke as the motor warms up. It has 2 terminals, 1 goes to ground and the other goes to a 12 V switched by the key I believe. The small amount of current heats up the strip. It's been a while since I messed with one though so better double check.
Thread
Thread Starter
Forum
Replies
Last Post