ek9 mirror part # question
#1
Registered Member
Thread Starter
Join Date: Jul 2006
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
ek9 mirror part # question
what are the part # or equivalent integra part #'s for the bolts that hold the mirrors on the the door, and the bolts that hold the mirror on to the base.
thanks..
thanks..
#3
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek9 mirror part # question
are you talking about the 3 studs that go through the door and have the 8mm nuts ?
those are universal and can be used from any eg/dc/ek
those are universal and can be used from any eg/dc/ek
#7
i pooped a squirrel
Join Date: Nov 2009
Location: Ravaging shitholes
Posts: 9,307
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered Member
Thread Starter
Join Date: Jul 2006
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek9 mirror part # question
taylors, ace, lowes, hope depot, they don't have a huge metric selection, acura dealer ship gave me some bolts for free, but they are all a little off..
instead of phillips top 5mm .80 8mm, i got some phillips top 5mm .80 9mm which will work with an extra washer..
instead of 8mm top 5mm .80 12mm, i got some 4mm top 5mm .80 12mm which will need a washer just so it won't go through the hole..
usdm mirrors are held on differently than lets say, JDM mirrors.. and i paid about $600 for a pair of OEM LHD ones, so I much rather pay a few dollars and have the right bolts, i think what I have now will work for now..
but if any one comes across the part #'s lmk... please...
instead of phillips top 5mm .80 8mm, i got some phillips top 5mm .80 9mm which will work with an extra washer..
instead of 8mm top 5mm .80 12mm, i got some 4mm top 5mm .80 12mm which will need a washer just so it won't go through the hole..
usdm mirrors are held on differently than lets say, JDM mirrors.. and i paid about $600 for a pair of OEM LHD ones, so I much rather pay a few dollars and have the right bolts, i think what I have now will work for now..
but if any one comes across the part #'s lmk... please...