OBXboost

Here is what my stereo consists of.

Kenwood Excelon 869 HU
2 MB Quart Coaxial Front door speakers
2 JL Audio 10W3V2 subs.
1 JL Audio 450/4 4 channel amp.

The subs are wired bridged via channel 1 and 2 in series.

The door speakers are wired in stereo on channels 3 and 4.

I need to know what settings on the HU will be best and what settings on the amp will take full advantage on this setup.

Here's the info on the amp http://mobile.jlaudio.com/products_amps.php?amp_id=255

Here's the info on the subs http://mobile.jlaudio.com/products_...hp?series_id=11

Here's the info on the door speakers http://www.mbquart.de/en/produkte/c....php?nr=dke_113

BD MITSU

Hey man I can tune it.. Just give me a pm.

Reggie

ToyotaTechGeek

define "tune"
i mean, i could bring out a full spectrum analyzer and use pink and white noise, 'tune' for flat or other tuning curves, tell you how many cycles will 'stand' in your car's cabin, etc.
you haven't said much about the sub enclosure(s) nor the purpose of the system (show, or audiophile, or just random listening)

OBXboost

It's a custom box enclosure mounted behind the rear seats, all MDF.

By tuning I mean I want a great range of sound replication by usage of the crossovers available. I want a great crisp sound through the frontal image with a great combo of low's, mid's, and hi's. I want the subs to pound as hard as they can without distortion or clipping.

I want the most I can get with what I have in other words.

ToyotaTechGeek

what was the F3 of the enclosure? and what is the useable frequency range of the coaxials? what crossovers will you be using? active or passive? how many dB roll-off?

BD MITSU

look man i worked at the local stereo shop for the past 8 years just leaving now. to persue better interest.. pm me and ill get your sounds right...

fmstatic

guys i think he's just asking for what to set the EQ on his HU at

i cross my mids at 80hz to the sub and 2.5khz to the tweets

BD MITSU

d\\what happened with fri?