need help in the nn area
 

i just bought some racing seats and i need help installing them so if anybody has installed racing seats with universal sliders in a 97 eclipse let me know. beer food money whateva you want i can get if you help me

Re: need help in the nn area
 

ive had the pleasure of making brackets for racing seats in my boys 1st gen. but thats just because the brackets they came with where way too high{he's a tall bitch} id like to point out all seats have basically the same bolt pattern on the bottom, and a set of {car specific} brackets from pretty much any brand seat company will fit any brand seat. worst case you have to redrill a couple holes in the frame.. whoopty doo :p

Re: need help in the nn area
 

i was gonna use my stock brackets but i cant figuere out how the hell to get them bitches to come off to that i can replace them on to the new seats. if i cant find anybody to help me worst case scenario i will make some brackets out of some metal shit

Re: need help in the nn area
 

stock brackets more than likely will not work. just make some spacers and use long bolts :)... hmm scary

Re: need help in the nn area
 

lol yea if i could only figure out how to get them circle things of the ends of the stock brakets i could use them and then it would match perfect. but idk if they come off or not

Re: need help in the nn area
 

bump

Re: need help in the nn area
 

circle t hings? hmm try a die grinder :) works for me. anyways i meant if you get brackets fromlike sparco or something any AFTERMARKET seat bracket should fit your seat.... the stock brackets are beastly :)

Re: need help in the nn area
 

i ended up making my own brackets took me 5 hours to get everything straight

Re: need help in the nn area
 

i usually just make large diameter spacers out of aluminium on the lathe, and through bolt the seat to the floor. takes like an hour a seat.