dXXX96civic

Found some info and wanted to share





Normally find them in stock at: http://www.hondapartsnow.com/interio...a~grommet.html

Just search and order, good information for someone shaving the firewall that does not have the time and tools to weld it right away but still want a temporary (or permanent) solution that looks clean

Enjoy

Fabrik8

I'll sticky this for now.

jdm ek 9

Thank a lot I have been looking for these

ILOVEHATERS

Wish I would have went with this instead of welding the holes closed. Like the looks of it a lot

dXXX96civic

I think if you weld them all shut you should still just plug these holes and get a larger piece to flatten it all out and make it smooth instead of patching each one

Project "H"

good find ive been wondering if they made delets for these spots mainly to take out my a/c lines

dru

does honda (or another any other make for that matter) have sites like realoem.com or bmwfans.info? makes it real easy to do part number searches

Project "H"

I usaully use www.hondapartsdeals.com to look up part numbers

kadafiz

would the circular one work for cruise control delete?

TNGChris

I've just used a grommet from Lowes' hardware section to fill the cruise cable hole.I believe it was 1" diameter,but you should definitely measure to be sure.
As far as that goes,the OEM stuff is nice for the oblong holes like the A/C or harness holes,but for regular 3/4",1" or whatever size round holes,any hardware store will have grommets for probably 1/10th the price,and with no wait.