tach install on 02 celica gt
04-15-2004, 10:45 AM
#1
Registered User
Thread Starter
Join Date: Feb 2003
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
tach install on 02 celica gt
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks
04-15-2004, 11:33 AM
#2
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: tach install on 02 celica gt
Originally Posted by 17secGT
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks
04-17-2004, 07:12 PM
#4
Banned
Join Date: Oct 2003
Location: ignoring NFC and his bitch's
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Re: tach install on 02 celica gt
Originally Posted by 17secGT
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks
step one - get up to 50mph.
step two - roll down the window.
step three - put the tach in your hand and cock back.
step four - release.
step five - brush your shoulders off.
04-18-2004, 02:09 PM
#5
Slow as Shit
Join Date: Jan 2003
Location: Short Pump
Posts: 10,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: tach install on 02 celica gt
Hey Nicky.
I am not sure, but can't you tap into the tach feed wire going from the pcm to the tach. I know for the 4.6L if you have a COP you have to get an adapter for that. If you have coil packs not a COP, then you can tap into the tach feed wire from the tach to the pcm.
You can also call Autometer techline and they will be able to tell you what you need.
I am not sure, but can't you tap into the tach feed wire going from the pcm to the tach. I know for the 4.6L if you have a COP you have to get an adapter for that. If you have coil packs not a COP, then you can tap into the tach feed wire from the tach to the pcm.
You can also call Autometer techline and they will be able to tell you what you need.
Thread
Thread Starter
Forum
Replies
Last Post
driftnby
Parts ARCHIVE
26
02-09-2008 05:36 AM
2fast4ya
757
2
08-12-2005 05:49 PM