what would i need to swap b18 into 97 civic coupe?
03-30-2009, 11:41 PM
#11
Registered Member
Join Date: Jul 2007
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Re: what would i need to swap b18 into 97 civic coupe?
96-00 civic's didnt have brackets welded to the frame rail like integra's and earlyer model civic's , the tranny side bracket bolts to the tranny . the mount bolts to the side of the frame rail , the driver side had a metal bracet that bolts to a two prong cast iron bracket that bolts to the block , and the metal bracet that comes off the cast piece bolts to a cylinder shaped mount that bolts to the top of the frame rail , the rear has a mount bolted to the subrframe and the motor is attached by a T bracket , and as i said in my earlyer post , you use the SOHC 96-00 tranny mount and bracket , driver side you use the SOHC mount and bracket but use the cast iron peice that bolts to the block out of a 99-00 si , and for the rear you use the SOHC mount that is bolted to the subframe and you use a T bracket out of a 99-00 SI ,shift linkage you use either SI or 94-00 integra,axles are the same thing 94-00 or SI ,wire harness just find one out of a 96-00 civic , as for a ECU use one that matchs the correct OBD as the wire harness you bought or buy the correct jumper harness and run a OBD1 ecu your choice ,cant get any more clear then that. also no matter what year motor you buy your going to have to use the sensors, injectors and distributor that match you wire harness.
Last edited by radiaki11; 03-31-2009 at 12:01 AM.
04-01-2009, 07:05 PM
#13
Registered Member
Join Date: Jul 2007
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
04-01-2009, 07:26 PM
#14
that dude
Join Date: Jun 2008
Location: the burg/newport news
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: what would i need to swap b18 into 97 civic coupe?
if you need anyparts to finish your swap lmk i have alot of ek b-series parts....gsr hydro tranny....innovative solid mounts....the timming belt bracket....and i have a 96-98 engine harness...just lmk i might or probly have it...good luck with everything tho...
04-01-2009, 11:19 PM
#15
I <3 My DSM
Join Date: Jul 2004
Location: Va Beach
Posts: 2,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: what would i need to swap b18 into 97 civic coupe?
96-00 civic's didnt have brackets welded to the frame rail like integra's and earlyer model civic's , the tranny side bracket bolts to the tranny . the mount bolts to the side of the frame rail , the driver side had a metal bracet that bolts to a two prong cast iron bracket that bolts to the block , and the metal bracet that comes off the cast piece bolts to a cylinder shaped mount that bolts to the top of the frame rail , the rear has a mount bolted to the subrframe and the motor is attached by a T bracket , and as i said in my earlyer post , you use the SOHC 96-00 tranny mount and bracket , driver side you use the SOHC mount and bracket but use the cast iron peice that bolts to the block out of a 99-00 si , and for the rear you use the SOHC mount that is bolted to the subframe and you use a T bracket out of a 99-00 SI ,shift linkage you use either SI or 94-00 integra,axles are the same thing 94-00 or SI ,wire harness just find one out of a 96-00 civic , as for a ECU use one that matchs the correct OBD as the wire harness you bought or buy the correct jumper harness and run a OBD1 ecu your choice ,cant get any more clear then that. also no matter what year motor you buy your going to have to use the sensors, injectors and distributor that match you wire harness.
04-02-2009, 06:13 PM
#16
Registered Member
Thread Starter
Join Date: Feb 2009
Location: p-town
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: what would i need to swap b18 into 97 civic coupe?
cant get much better.....i,ll probably get w/you about those parts for the swap(goob)i need just about everything,except motor...
Thread
Thread Starter
Forum
Replies
Last Post
crzyman1994
Want to Buy / Trade ARCHIVE
25
01-22-2008 09:01 PM
crzyman1994
Want to Buy / Trade ARCHIVE
5
11-21-2007 04:50 PM