how to set timing on a gsr
03-18-2008, 02:46 PM
#2
Registered Member
Join Date: Aug 2004
Location: Richmond
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to set timing on a gsr
on the cam gears. arrows pointing up with marks on the side lined up even across the head
line the crank up to the mark on cover or oil pump
line the crank up to the mark on cover or oil pump
03-19-2008, 09:22 AM
#8
Bearded.
Join Date: Jan 2005
Posts: 7,573
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to set timing on a gsr
when you put your valves in the head, your adjusting screws are set to stock valves, and stock cams.
one or more things could cause valves to be to tight.
the only thing i can tell you is to check and see if they are adjusted correctly. look eithe ron honda-tech, or the helms manual.
its real easy to do, if you've done them before.
if not bring me the ccar, and i will do it for you.
BTW, did you put aftermarket cams, springs, retainers, and valves in the car?
or just valves?
a little more information is needed.
are you sure your timing belt is correct? both cam marks should be parallel to the head, not the ground., and the mark on the timing cover is what you use to line up the crank. double check it with a long screwdriver through the #1 cylinder spark plug hole
one or more things could cause valves to be to tight.
the only thing i can tell you is to check and see if they are adjusted correctly. look eithe ron honda-tech, or the helms manual.
its real easy to do, if you've done them before.
if not bring me the ccar, and i will do it for you.
BTW, did you put aftermarket cams, springs, retainers, and valves in the car?
or just valves?
a little more information is needed.
are you sure your timing belt is correct? both cam marks should be parallel to the head, not the ground., and the mark on the timing cover is what you use to line up the crank. double check it with a long screwdriver through the #1 cylinder spark plug hole
03-19-2008, 12:44 PM
#9
-HUFF-
Join Date: Feb 2003
Posts: 1,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to set timing on a gsr
Timing belt change on gsr
http://www.c-speedracing.com/howto/timingbelt/tbelt.php
And how to set timing on gsr
http://www.c-speedracing.com/howto/timing/timing.php
Lot of other helpfull how to's
http://www.c-speedracing.com/howto.php
http://www.c-speedracing.com/howto/timingbelt/tbelt.php
And how to set timing on gsr
http://www.c-speedracing.com/howto/timing/timing.php
Lot of other helpfull how to's
http://www.c-speedracing.com/howto.php
