VADriven.com Forums

VADriven.com Forums (https://www.vadriven.com/forums/)
-   Tech Talk (https://www.vadriven.com/forums/tech-talk-9/)
-   -   tach install on 02 celica gt (https://www.vadriven.com/forums/tech-talk-9/tach-install-02-celica-gt-49750/)

17secGT 04-15-2004 10:45 AM

tach install on 02 celica gt
 
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks

CHAHONDA 04-15-2004 11:33 AM

Re: tach install on 02 celica gt
 

Originally Posted by 17secGT
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks

dont they come with a tach from the factory??? :confused: :wtf:

THATS FRESH 04-15-2004 11:45 AM

Re: tach install on 02 celica gt
 
wants rice...

_Red_Rocket_ 04-17-2004 07:12 PM

Re: tach install on 02 celica gt
 

Originally Posted by 17secGT
tryin to find out how to install the tach on a 02 celica gt before i start.....it has individual coil packs for each cylinder so i assume youd wire it through the comuter but which wire....if im way off let me know but i just need to know how to do it and get the most accurate reading....thanks

sure dude. her you go......

step one - get up to 50mph.

step two - roll down the window.

step three - put the tach in your hand and cock back.

step four - release.

step five - brush your shoulders off.

Woodrow 04-18-2004 02:09 PM

Re: tach install on 02 celica gt
 
Hey Nicky.
I am not sure, but can't you tap into the tach feed wire going from the pcm to the tach. I know for the 4.6L if you have a COP you have to get an adapter for that. If you have coil packs not a COP, then you can tap into the tach feed wire from the tach to the pcm.

You can also call Autometer techline and they will be able to tell you what you need.


All times are GMT -8. The time now is 11:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands