how to set timing on a gsr
 

delete

Re: how to set timing on a gsr
 

on the cam gears. arrows pointing up with marks on the side lined up even across the head

line the crank up to the mark on cover or oil pump

Re: how to set timing on a gsr
 

u thinking thats why its not starting?

Re: how to set timing on a gsr
 

or you forgot to hook up your distributor? 2 plugs


and or

your valves are to tight.

Re: how to set timing on a gsr
 

yes distrib is hooked up and what do you mean my valves are to tight?

Re: how to set timing on a gsr
 

my belt is loose when it tries to turn over too

Re: how to set timing on a gsr
 

Take off your valve cover and crank your motor. Look and see if the valves are moving correctly. May be too tight, like the guy above me said.

Re: how to set timing on a gsr
 

when you put your valves in the head, your adjusting screws are set to stock valves, and stock cams.

one or more things could cause valves to be to tight.

the only thing i can tell you is to check and see if they are adjusted correctly. look eithe ron honda-tech, or the helms manual.


its real easy to do, if you've done them before.

if not bring me the ccar, and i will do it for you.

BTW, did you put aftermarket cams, springs, retainers, and valves in the car?

or just valves?


a little more information is needed.

are you sure your timing belt is correct? both cam marks should be parallel to the head, not the ground., and the mark on the timing cover is what you use to line up the crank. double check it with a long screwdriver through the #1 cylinder spark plug hole

Re: how to set timing on a gsr
 

Timing belt change on gsr
http://www.c-speedracing.com/howto/timingbelt/tbelt.php

And how to set timing on gsr
http://www.c-speedracing.com/howto/timing/timing.php

Lot of other helpfull how to's
http://www.c-speedracing.com/howto.php

Re: how to set timing on a gsr
 

Your timing belt is loose???

Re: how to set timing on a gsr
 

yes sir once i saw that it was loose i stop cranking the motor thanks for all the help guys i have somebody coming to look at it on friday

Re: how to set timing on a gsr
 

Did you check the belt tensioner. It's either that, or you have the wrong belt on.

Re: how to set timing on a gsr
 

no i jus reused the belt all i did was slip the belt back on i didnt check the bottom end

Re: how to set timing on a gsr
 

need sum1 2 do it?