You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the VA Driven community today!
Results 1 to 1 of 1

Thread: 2004 Yamaha Raptor 660 + setup for sand drags

  1. #1
    diesel1313 is offline Registered Member
    Join Date
    Mar 2011

    2004 Yamaha Raptor 660 + setup for sand drags

    Name: Jason
    Location: Hampton
    Means of contact: Cash
    Price: $3500

    Description: 2004 Yamaha Raptor 660
    I am selling the ATV, +10” Sand Drag Swing Arm kit, and 727 big bore kit. I will sell the kits separately but would like to sell everything as a package deal. I also have a ton of spare parts that I will be selling as well.

    I am the only owner and I am a professional motorcycle technician, this ATV has been well taken care of. Unit comes with a clean VIN and title.

    The quad was modified for sand drags while I was living in AZ and is very fast. Although the 727 kit is not installed, the Edelbrock carb and HMF exhaust make a huge difference. I have reset all chassis settings back to stock and the unit can now be ridden anywhere. I had planned on racing it at Slades, but never found the time. This bike is a lot of fun and I will miss it.

    I have tried to be as thorough as I can be with this listing, there is a lot. I will edit the listing as needed if I find more things as I clean out my garage. If you have any questions please feel free to email me and I will get back to you a.s.a.p. I have more pictures than what I can post here so if there is something you want to see let me know. Thanks for your time.

    The ATV with following already done to it: Selling for $3200
    Edelbrock Carburetor #EB-3026 $675
    Carb was dyno tuned by Factory Pro while I worked at performance shop in AZ, has custom ground slide needle
    HMF exhaust – Full system performance series with candy red silencer - $525
    HPC ceramic coating applied to exhaust head pipes and mid pipe - $75
    Moose Parking Brake Block off plate
    Renthal Handle Bars with FMF Grips - $75
    Gunnar Kill Switch Tether - $50
    Lone Star Billet Axle Locknut Yamaha Raptor 660 - $99
    Douglas Red Label Wheels - $320
    Maxxis Razr Tires - $350 (when new)
    Yamaha GYTR Shock Covers
    Yamaha GYTR Water Pump/ Oil Filter Cover
    ASV Clutch Lever, Brake Lever, Brake Lever Perch
    New Battery
    Engine Ice Coolant
    Factory Yamaha service manual

    Sand Drag Kit: Selling for $700
    Skat-Trak Hauler Tires - $260(New)
    Douglas Blue label Wheels - $100
    Metal Tech +10” Swing Arm Powder Coated Red to Match Frame - $530
    Billet Alluminum Axle Carrier - $200
    Durablue Front A-Arms Lowering Kit - $105
    Pivot Works Swing Arm bearing kit - $50

    727 Big Bore Kit: Selling for $700
    JE Pistons 727 Piston
    Rings, Wrist Pin, and Circlips
    New Sleeve already installed in cylinder—this cylinder has already had the machine work done
    The Kit was $350 and the machine work was another $150
    Kibblewhite Hi Performance Lightweight Racing Valve Spring Kit with Titanium Retainers - $180
    Kibblewhite Black Diamond Valve - $180
    Hotcams Stage 3 High Performance Cam - $200
    Airbox with K&N airfilter and Billet adapter installed
    *This kit requires cases to be machined to allow for larger cylinder to be installed. Not a bolt on kit.

    Extra Parts: Make an Offer
    Alba Action Nerf Bars(not pictured but have picture)
    Thermostat housing and coolant hoses
    Oil tank and lines
    Coolant overflow tank and lines
    Rear brake lever and perch X2
    Foot Pegs with shifter
    Right headlight
    Front hub with brake disk
    Right A-Arm and spindle
    Tie Rods
    Rear shock linkage
    Rear hubs
    Rear sprocket and sprocket holder
    Rear brake disk and holder
    Axle nuts
    Rear axle carrier(bearings bad)
    Yamaha GYTR “Carbon Fiber Looking” plastic engine covers
    Cylinder head and valve cover with broken mounting lug, needs to be welded
    Valve cover(useless without its matched head but has rocker arms installed)
    Engine internals for lower end- transmission, counter balancer, clutch, etc.
    Lots of bolts and hardware

    These parts are things that I have acquired over the years. The engine parts are from another unit that was crashed and I helped part out. I never had the chance to go through everything real well and get cleaned up. The idea was to build a spare engine someday but that never happened. I cannot guarantee the quality of all parts but I will do my best to look at anything you may be interested in.
    If you need anything from the spare part list, or would like to buy all of them outright, send me an email.

    Attached Thumbnails Attached Thumbnails 2004 Yamaha Raptor 660 + setup for sand drags-dsc00079-jpg   2004 Yamaha Raptor 660 + setup for sand drags-dsc00090-jpg   2004 Yamaha Raptor 660 + setup for sand drags-dsc00093-jpg   2004 Yamaha Raptor 660 + setup for sand drags-dsc00094-jpg  


Similar Threads

  1. FS: 2004 Yamaha Raptor 660 $2500 OBO
    By Shibbymcpot730 in forum Other
    Replies: 3
    Last Post: 02-05-2013, 02:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts