Fully Built Turbo B-Series Short Block
06-08-2013, 12:06 PM
#1
Registered Member
Thread Starter
Join Date: Apr 2006
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Fully Built Turbo B-Series Short Block
Name: Tom
Location: Arlington, VA
Means of contact: Email - thomasdclements@gmail.com
Price: $2000 Firm
Description:
InlinePRO signature series short block with less than 3000 miles. This was a street motor and never saw more than 14PSI. This motor has the ability to make 900+ HP (depending on turbo of course).
Build includes:
B18 LS block, AEBS sleeves, CP Pistons(9.0:1 compression x 83mm bore), inlinePRO rods with 3/8th ARP2000 rod bolts, and ACL race bearings.
The block will also come with oil pump, oil pickup, windage tray, oil pan, timing belt, water pump, timing belt cover, crank pulley, water pipe, thermostat housing, and PCV box.
Please email me if you have any questions or would like to come take a look.
Price is $2000.00 FIRM!
Thanks!
Pictures:
Location: Arlington, VA
Means of contact: Email - thomasdclements@gmail.com
Price: $2000 Firm
Description:
InlinePRO signature series short block with less than 3000 miles. This was a street motor and never saw more than 14PSI. This motor has the ability to make 900+ HP (depending on turbo of course).
Build includes:
B18 LS block, AEBS sleeves, CP Pistons(9.0:1 compression x 83mm bore), inlinePRO rods with 3/8th ARP2000 rod bolts, and ACL race bearings.
The block will also come with oil pump, oil pickup, windage tray, oil pan, timing belt, water pump, timing belt cover, crank pulley, water pipe, thermostat housing, and PCV box.
Please email me if you have any questions or would like to come take a look.
Price is $2000.00 FIRM!
Thanks!
Pictures:
Thread
Thread Starter
Forum
Replies
Last Post
94db8
Engine / Exhaust / Drivetrain
23
06-14-2010 10:49 AM