Hope its fast!!

[chirp the 1-2]

1

[chirp the 1-2]

2

[ECR]

Sure as Hell looks fast.....what is it anyways...im dumb

[chirp the 1-2]

3

[TPJ]

sohc honda motor

[chirp the 1-2]

Gear is a little of center in picture but you can see in order to time it because of the decking and milling had to advance about 2 degrees!!

Thats ok cause I believe top end tuning will require retarding the cam!?

[chirp the 1-2]

Mini Me Vtec
89 crx bottom end blueprinted to honda specs
98 ex sohc vtec head full race port@polish
=11.5-1 compression
Basically everything in this motor is new!!!
Everything has been port matched and cleaned!!
All thats left is getting shad to do the manifold swap (dx to si)
New rad,fan,header.
ETA 2 weeks!!

[TPJ]

do you need a manifold? i have a few zc intake manifolds sitting around if you do.

[ECR]

Originally posted by chirp the 1-2
Mini Me Vtec
89 crx bottom end blueprinted to honda specs
98 ex sohc vtec head full race port@polish
=11.5-1 compression
Basically everything in this motor is new!!!
Everything has been port matched and cleaned!!
All thats left is getting shad to do the manifold swap (dx to si)
New rad,fan,header.
ETA 2 weeks!!


i knew that ;)

[CNUmotorsports]

Looks good man, what kinda HP numbers are you expecting?

[redprelude22]

looks good. but why did you waste your time with a SOHC?

[Mr. Rooney]

Originally posted by redprelude22
looks good. but why did you waste your time with a SOHC?

shut your whole.

[patastinky]

keep us posted, looks great how hp/tq u can get out of that?

[flow fx]

oh god.

a fram filter.

be ready to rebuild that "beast".

[Mr. Rooney]

Originally posted by flo w fx
oh god.

a fram filter.

be ready to rebuild that "beast".


why do you say that?

[ef_what?]

cuz he's a midget :stupid:

[chirp the 1-2]

Originally posted by CNUmotorsports
Looks good man, what kinda HP numbers are you expecting?
Hoping for 150-160 when I get the cam valvetrain and skunk manifold!! Hoping to break 13s then!!

Eventually 1 piece fiberglass front end,hatch,doors!!

[chirp the 1-2]

Originally posted by redprelude22
looks good. but why did you waste your time with a SOHC?

Same reason you wasted your time on a heavy ass car its what I wanted!!

And I wanted to be different.

Also hoping to shit on preludes then pop the hood and make them cry.:eek: :wow: :fart:

[chirp the 1-2]

Originally posted by flo w fx
oh god.

a fram filter.

be ready to rebuild that "beast".

Trust its just to plug the hole.

Nothing but a honda filter will be on here!!!

[flow fx]

Originally posted by chirp the 1-2
Trust its just to plug the hole.

Nothing but a honda filter will be on here!!!

thank god at least you know about Fram..

For everyone else.. Fram isnt a very highly reccomended filter company, in any way shape or form..

[patastinky]

Originally posted by flo w fx
thank god at least you know about Fram..

For everyone else.. Fram isnt a very highly reccomended filter company, in any way shape or form..


really, i thought it was.. blah!! so honda filter's are better then aftermarket ones????:confused:

[s2k7]

Originally posted by patastinky
really, i thought it was.. blah!! so honda filter's are better then aftermarket ones????:confused:

Just because they have a valve, when you shut your car off it keeps the oil in the filter so i doesnt have to recirulate the oil back through it again.




and about your motor...




aww...the little sohc that could ;)

[zexpwrd4door]

hey now everyone dont gotta be dohc.....there is more out there then that.......150-160 hp? better get some n2o on it buddy trust me i know......hahahah....different yea a little...but i had mine first ....good luck

[g S x]

I've been using Fram for a while.. whats a good oil filter to use? K&N? kinda expensive for a oil filter...

[s2k7]

man its all in preference, sort of like people who own imports talk shit about domestics and vise versa. Fram is good, use what you have had your best experience with. Dont like a few people change your ways

[g S x]

Well I mean I haven't actually read reviews on a oil filter, for all i know Fram could be coming apart and stickin inside my engine.. just wonderin what anyone thinks could be better.

[shawn22]

i thought fram wasn't to be used because it was too good of a filter as in it blocked everything even some oil. But that is second hand info...

[chirp the 1-2]

Originally posted by zexpwrd4door
hey now everyone dont gotta be dohc.....there is more out there then that.......150-160 hp? better get some n2o on it buddy trust me i know......hahahah....different yea a little...but i had mine first ....good luck

You have a completely rebuilt ported polished blueprinted mini me vtec motor???

Trust I will hit those numbers without spray!!!!!!!!!
Besides (if you read) sprayin on 11.5to1 probably wouldnt last!!!!

[S dot Camp]

Originally posted by chirp the 1-2
You have a completely rebuilt ported polished blueprinted mini me vtec motor???

Trust I will hit those numbers without spray!!!!!!!!!
Besides (if you read) sprayin on 11.5to1 probably wouldnt last!!!! I have faith in you Mike! I willpersonally laugh out loud when it makes that much power or more. It's going to be awesome.

[chirp the 1-2]

scott knows the deal I aint fuckin around!!!!

[S dot Camp]

Us Hall kids need to stick together! HaHa

[projsr20det]

Whats up Mike,
I see you got out of the show scene. Good luck on your new project!
Chris
ex Blue Team member

[zexpwrd4door]

ok just sayin bro...its not like i dont have about the same basic thing you do buddy :) just for yur info

[zexpwrd4door]

oh yeah its fun to spray on 10.5:1 i wouldnt mind spraying on 11.5:1 ......be ballin :D

[chirp the 1-2]

Your nuts, cant say I didnt think about it though!!!
Guess Ill see how my air fuel looks.

[chirp the 1-2]

Originally posted by projsr20det
Whats up Mike,
I see you got out of the show scene. Good luck on your new project!
Chris
ex Blue Team member
What up man, you gonna be runnin your car at dinwiddie this season??

[Not Registered]

Not to be funny, but.... where's the other half of the motor? :D

[chirp the 1-2]

dont worry wasnt funny

[CHAHONDA]

Originally posted by Not Registered
Not to be funny, but.... where's the other half of the motor? :D


SHUT UP MANNY!:rolleyes: :moon:

[projsr20det]

Originally posted by chirp the 1-2
What up man, you gonna be runnin your car at dinwiddie this season??
Yeah, hopefully w/ the turbo by April. If things go right.

[350z33]

Originally posted by projsr20det
Whats up Mike,
I see you got out of the show scene. Good luck on your new project!
Chris
ex Blue Team member

I think I was on the blue team too.
Mike

[1BadSC300]

YO, good luck with the sohc!! more power to ya, i like projects that are actually a challenge. anyone can throw n2o on a vtec and be fast, but it takes talent to build a all motor sohc BEAST!! MORE POWER TO YA!:cool: :)

[chirp the 1-2]

Thanks homie I appreciate the words!! By the way the motor is in and running everything seems to be perfect!!!
I will be babying the motor for about a 1000 miles (new rings).
But it feels strong!!

[SpeedAddict90]

Hey man that is one sweet sohc. Nice to see that someone isn't afraid to be different. Glad to here it is running all right too look to see you out this summer.:D

[99slowlst]

Originally posted by redprelude22
looks good. but why did you waste your time with a SOHC?

i wondered the same thing.


id have gone with a swap or something......

[wickedstangwv]

FRAM ALSO HAS A FILTER THAT HAS THE VALVE IN IT. ALSO I HAVE A FRIEND WITH A 1200 HP MUSTANG THAT RUNS NOTHING BUT FRAM.

[Flite]

I can't wait to see this thing. I'd like to run it in the crix. Honestly I hope you beat me...that'd be so dope.

[urvtecs2slo]

the thing with hondas is, there arent many aftermarket parts that will last as long as the real deal. filters, radiators, anything. this might have already been said, but i read something on page 2 that made me want to say this, so i said it.

[1BadSC300]

what im starting to learn about stock parts is: no problems, lasts longer and runs better...imo

the japanese spent alot of man power and time coming up with the perfect combination of parts.....it seemed to work!! if only they'd let us have the real cars over here now :( sylvia, soarer, skyline, and the SIR

[blairellis]

SINGIN MY ONE CAM SONG!