question 4 u 4x4 gurus

[sprayedcivic]

im lookin at a 85 silverado it has a 4 inch susp lift and 3 inch body it has 35 on it now how much bigger should fit you yhink 38 would also what on it now are all terrains so they look smaller maybe if i put mud terrain it would look better just need some input

thanks

[broncomx]

you would probably wanna do 6 inch suspension lift and 3 inch body lift, or just leave it like that and put it on 12 or 14 wide rims and some m/ts

[ChevyMudtruck]

you can defently fit 38's if ya cut the corners on the front fenders speacially if your not gonna wheel it hard. . .
my 78 (same openings) i had 39's on it with 4 and 3 and then 44's with alot of cutting

this was 4 and 3 with 39's (stupid sts's . . only on there a week lol) *tear* it was such a small truck then
http://i75.photobucket.com/albums/i292/chevymudtruck/DSC00036.jpg

[slowrx]

you would probably wanna do 6 inch suspension lift and 3 inch body lift, or just leave it like that and put it on 12 or 14 wide rims and some m/ts

+1 Throw some 14 wides and some 35x16 boggers on it. That would look hot.

[tenacious]

Is the truck 1/2 or 3/4 ton? no need 2 go bigr than 35s if it's 1/2 ton. swap it out for sum 8lug and run 38.5s!

[ChevyMudtruck]

Is the truck 1/2 or 3/4 ton? no need 2 go bigr than 35s if it's 1/2 ton. swap it out for sum 8lug and run 38.5s!
ya do know that the 1/2 and 3/4 ton fronts run everything the same except the lug pattern? all the axle shafts, wheel bearings, gears, hubs and brakes etc.

so the front is usually what people don't like 1/2 tons but i don't like the 10 bolt rears with c clips . 12 still has c -clips but a little stronger

[tenacious]

True True True. my bust.