[703] HI-FLO Custom Exhaust

[KhanArtisT]

Cool guy, good work at a good price. Made a custom Y pipe and installed a full exhaust (header to mufflers) for my RX7 which sounds incredible, fast service and cool people.

9045 Jerrys Cir
Manassas, VA 20110

[1cleanEM100]

Hi flow is great, they also did my exhaust.. can't get much better!!!

[cbeezer1]

Hi-Flo ripped me off. waste of my time.

Talked to Scott (owner) 2 times prior to dropping my car off. The day I showed up with the car he said he remembered what I wanted, but right after that asked me what I wanted... I explained it again (I would rather explain 2000 more times just to make sure we were on the same page) he said he understood. 2 days later he calls me up and asked me what side I wanted the dump on, I told him I would just drop by. I showed up and saw what he was allowing to be made. I wanted a nice equal length manifold. They used a band saw to create the flange's, the welds were shotty, the pipes had kinks where they bent it (flow issues), and it wasn't even close to equal length. The best part was that he called me over to talk about dump placement and I show up to this crap manifold, which didn't even have a waste gate port!!!!

I told him that I was unhappy with the work, he wanted me to explain to him again. So when I told him what I wanted this time he said he wouldn't do it. Said it wasn't the best for flow. I was furious so I left. the next day I called and said I was coming to pick up the car. All in all, he charged me $400 for 1 V-band clamp and his labor. If you value your time and money do not go to here. They don't know what their doing. If it isn't a straight pipe they have no clue. I have a picture of the thing if your interested (it’s on a different computer and don’t feel like getting it)

[deez90awd]

I would like to see what he did for you.

[Israel]

Hi-Flo ripped me off. waste of my time.

Talked to Scott (owner) 2 times prior to dropping my car off. The day I showed up with the car he said he remembered what I wanted, but right after that asked me what I wanted... I explained it again (I would rather explain 2000 more times just to make sure we were on the same page) he said he understood. 2 days later he calls me up and asked me what side I wanted the dump on, I told him I would just drop by. I showed up and saw what he was allowing to be made. I wanted a nice equal length manifold. They used a band saw to create the flange's, the welds were shotty, the pipes had kinks where they bent it (flow issues), and it wasn't even close to equal length. The best part was that he called me over to talk about dump placement and I show up to this crap manifold, which didn't even have a waste gate port!!!!

I told him that I was unhappy with the work, he wanted me to explain to him again. So when I told him what I wanted this time he said he wouldn't do it. Said it wasn't the best for flow. I was furious so I left. the next day I called and said I was coming to pick up the car. All in all, he charged me $400 for 1 V-band clamp and his labor. If you value your time and money do not go to here. They don't know what their doing. If it isn't a straight pipe they have no clue. I have a picture of the thing if your interested (it’s on a different computer and don’t feel like getting it)

Post pictures because me and many friends have had work done by him and never had a problem.

[Bubba]

Scott has done the exhaust on every car I have had exhaust done on. He does great work sorry to hear you had a bad time. He made me a custom H pipe on a grandmarquis years ago with flow masters and everybody thought I had a mustang.

[chucky22]

exhaust is so much different then and equal length manifold my friend

[cbeezer1]

exhaust is so much different then and equal length manifold my friend

I am glad you noticed that. I haven’t forgot about my post or the replies. My main computer is down which has the image on it (I only have 1, done with my phone). I am going to try and get the image off the drive before Sunday (leaving for Seattle, WA). Also note that the person who was doing the work was his right hand man (don't remember name), but Scott allowed it to happen.

If you need a muffler put on, H pipe or anything simple... then he's your man. Just don't ask for something major.

On another side note, I now have someone who can do what I want. The company is High Purity Systems (HPS), they typically don't work on cars. Anyway, when the manifold is complete I will post pictures. This manifold will be exactly what I asked for, nothing different...

[TAK82]

scott's a great guy, his work is top notch, better than some hispanic owned welding shops

he did my motor mount and it's good work

[slicendice38]

reply to this cebeezer1 little bitch that won't post his name talking shit,better clue in!!!This is Todd the right hand man that puts the rubber to the road,I custom build you a header and down pipe that even you couldn't argue about the flow,back pressure or heat dispersion,,,your big whine was that it wasn't aesthetically pleasing to you!!!!you change your story contently depending on who will listen!!!!!
WELL LISTEN UP,,,,even when your own father knows it's what you wanted and described,,I've got 2 hours talking with your dad 6 hours listening to you go in circles 2hours it to discussions with other fabricators and 5 hours into creating fabing and installing a header and turbo into something so you can keep your A/C and not change your rad to hear{it's not aesthetically pleasing to me}
lets face it every one,more than the average mile was put into this job by far!!!!the job was finished but the kid didn't think it was pretty enough to match his manicure!
You want to talk crap,stop being a worm,do it in front of me ,not behind my back bitch

[Bubba]

exhaust is so much different then and equal length manifold my friend


No shit sherlock. But he did all the custom bends and welding. Scott is a stand up guy and stands behind his work. so maybe this kid wanted something all nice and pretty and chrome looking. I am sure what ever Scoot built for this kid was great work and a awsome product.




I am glad you noticed that. I haven’t forgot about my post or the replies. My main computer is down which has the image on it (I only have 1, done with my phone). I am going to try and get the image off the drive before Sunday (leaving for Seattle, WA). Also note that the person who was doing the work was his right hand man (don't remember name), but Scott allowed it to happen.

If you need a muffler put on, H pipe or anything simple... then he's your man. Just don't ask for something major.

On another side note, I now have someone who can do what I want. The company is High Purity Systems (HPS), they typically don't work on cars. Anyway, when the manifold is complete I will post pictures. This manifold will be exactly what I asked for, nothing different...


I have seen more than a few cars Scott and his boy have built I am sure by far it is nicer than anything you will ever build. I for one know I have probably been building and working on cars longer than you have been driving. So where are these pics you promised?

[chucky22]

Whatever dude...point is next time take your car to someone who has good rep of there fab work not some person whos only good with mustangs and exhaust work. I heard that dude has shitty welds and i saw them.

[Bubba]

And what makes you the fabrication guru?

[chucky22]

I know what nice welds are suppose to look like "Bubba" or atleast decent ones. Im not saying I weld the best but if your going to dedicate your job to basically welding come on man. IM sorry hes your friend and all but its a vendor review sometimes you get good ones and sometimes there bad

[eghondafamily]

i went to scott and he did a real nice job welding my downpipe to my stock exhaust and have had no problems and ive been driving my car daily and its boosted. scott does good work if you ask me

[Bubba]

I know what nice welds are suppose to look like "Bubba" or atleast decent ones. Im not saying I weld the best but if your going to dedicate your job to basically welding come on man. IM sorry hes your friend and all but its a vendor review sometimes you get good ones and sometimes there bad


Yes sometimes you get good ones and bad ones. I just know most of the work I have seen come from Scott is good. He as allways done excellent work for me. He is also getting ready to do me a custom down pipe and exhaust on my new project. He also did my Jetta that I have plenty of 1st place trophies to show for how nice it was done. I haven't seen this manifold he made and this guy has yet to show pics so who really knows what this thing looks like.

[ricin4ever]

if he wasnt good he wouldnt be in business ! he did my exhaust and it is great welds are good but not pretty but as long as they penetrate and hold then its good! who cares when its under the car lol bump!

[Bubba]

Oh yeah not to mention if he does such bad work why do guys with 100K benz's go to him.

[eghondafamily]

yea dont let that guy fool you, i talked to scott 2day and he told me that guy kept changin his mind and didnt know what he wanted to do, so that doesnt seem like scotts fault its the guy b/c he couldnt make up his mind