[757] Dyno Inc.

[interceptor sti]

just want to say thanks to the guys up at dyno inc for the fast and professional service. they hooked me up. soon they will be tuning my car when i get some more money. i would strongly recommend this shop to any AWD guy, even those FWD and RWD guys too! :thup: :thup:.......can't wait to go back!!!!

[idriveahonda]

Ya, they are def some great guys. MJ knows what he is doing and is very professional as long as he is approached the same.

[Wrecked R6]

thanks guys we appreciate the business.

[Nigerian Hair]

best Dyno prices around..friendly service,and a great place to hang around.

[michael-17]

where is this place at i might get them to tune my zc for me

[Hatch Man(GsR)]

549 S. Birdneck - suit 108
Virginia Beach, Virginia 23451

(757) 493-3555

[B-Well]

I stopped by today, its nice. Close to being completed. They are gonna be my friend for tuning very soon. How much is it for a couple pulls?

[Nigerian Hair]

I stopped by today, its nice. Close to being completed. They are gonna be my friend for tuning very soon. How much is it for a couple pulls?


FWD and RWD - 50$ w/ A/F

AWD - 75$ w/ A/F

[1foxbody]

I might be going there soon seems like a good price.

[kirill]

best Dyno prices around..friendly service,and a great place to hang around.
"do you work there? everyone is wondering"


sounds familiar?

[japslapr]

Yes... Had my car on their dyno already... great guys, great equipment. I will be tuning there as well!!!

[Broke Neck]

Just wanted to put in a good word as well. I got a baseline on my SC today, and got to see what my car was actually doing Air/Fuel wise.

Called around this morning and talked to a few dyno shops, dont know who it was I spoke to on the phone at Dyno Inc. but they were very curtious and told me to come in whenever. Got there they pulled a car out so I could Dyno.

Very good price as well.

[Voodoo ST]

Thank you very much...... if we can help in any way please give us a call.

Shawn-

[turbo98]

yeah they took care of me when i brought my car their. i would recommend them to anyone.
adam

[black6gen]

Definately cool ass customer friendly guys!!! They will be tuning my civic here in the near future.

[tHe HyBr1d]

I just want to say thanks again to all the guys at Dyno inc.You guys did a hell of a job(micah,hayden,dom). I would recommend these guys to everyone.You guys are good people I'll see ya'll later this week.:)

[Corey]

Maybe some information on what was done is in order? If I was looking for threads where someone had certain work done this would not help me at all.

[blackevo110]

what are you talking about.

and the work preformed was a reflash on an evo 8...first pull before the flash was 204hp and 197tq as i recall (on a mustang dyno) and after the flash he netted 250hp and 247 torque, i need to go grab the sheet, but either way it was a massive gain from a reflash.

[will_rex]

So I'm guessing you guys flash Evo's? If so, how much for a baseline dyno, re-flash and final pull? I just heard about you guys from Boostfed. I'm definitely interested. You can PM me a price quote. Thanks.

[1320B4U]

Good Numbers at the Dyno day!

[Voodoo ST]

So I'm guessing you guys flash Evo's? If so, how much for a baseline dyno, re-flash and final pull? I just heard about you guys from Boostfed. I'm definitely interested. You can PM me a price quote. Thanks.

PMed

[Homemade WRX]

So I'm guessing you guys flash Evo's? If so, how much for a baseline dyno, re-flash and final pull? I just heard about you guys from Boostfed. I'm definitely interested. You can PM me a price quote. Thanks.
we can flash evo's, wrx's and sti's...

[tHe HyBr1d]

They flashed mine. Got an extra 46 hp and 43 trq :D

[blackevo110]

i knew it was close to 50...i dont have your numbers with me so i guessed.

[....AJ....]

Have you guys done any Evo clutches before? Not doubting your work at all, just wanna see if there's any support. Because I'm thinking of just putting an exedy clutch in and trashing the ACT.

[Nigerian Hair]

can anyone at dyno inc tune GOOD with hondata?

[Homemade WRX]

Have you guys done any Evo clutches before? Not doubting your work at all, just wanna see if there's any support. Because I'm thinking of just putting an exedy clutch in and trashing the ACT.
let me guess...the stocker is taking a dump on you too...you wouldn't be the first ;)

and we don't have the hondata software...is yours "unlocked"?...

[EG92Turbo]

ok,but is anyone familiar with the tuning program.

[han410]

cant wait to get my mr2 on the dyno and get it tuned... haha
it was fun day overall.... thanks

[bennycnu11]

Have you guys done any Evo clutches before? Not doubting your work at all, just wanna see if there's any support. Because I'm thinking of just putting an exedy clutch in and trashing the ACT.

on evom talk to jusssblaze he just installed an exedy stage 1, and clutch about two months ago. Thats if you wanted to save money to do it yourself; with help it took him a weekend.

[chea I I]

Great guys there always give happy endings if you request it.

[phxaz]

Dyno Inc. gets a :thup: from me. As soon as I called for an appointment, they got me in the next day. Started no more than 5 min after I got there and finished it quickly. Even though I am a subaru newbie, they explained everything to me as it was done like it wasnt a hassle unlike other places I have been to.

Thanks again, you have my business.

Respectfully,

Korey

[Snoopy81]

I love you Shawn haha
Bump for some awsome Dyno Guys
Bump For a friendly and Nice place to hang!!!
Dyno Inc all day

[ShaneJeffers28]

Awesome place to get anything on your car done..good prices..awesome guys.. I highly reccomend them!!!

[LUDEacris]

hey i have a 91 prelude, soon to be boosted and im looking for someone to tune it for me. I am going to have a very rough basemap made by a friend but i need to go somewhere where they can perfect it. How much would it cost for someone to tune it for me on the dyno?

[Homemade WRX]

hey i have a 91 prelude, soon to be boosted and im looking for someone to tune it for me. I am going to have a very rough basemap made by a friend but i need to go somewhere where they can perfect it. How much would it cost for someone to tune it for me on the dyno?

what EM are you running?

[2fast4ya]

I know it isn't what you all usually do but im curious of how little horsepower my 95 altima is making ive done all the bolt-ons had it dynoed when it was stock. Just seeing if I could set up a time when i could bring my altima by and get her on the dyno before i do anything else to it. $50 is a great price for pulls and especially to have nice people doing work on your car. Please let me know.

[Homemade WRX]

yeah, just give us a call and place an appointment.
http://members.cox.net/drummerboy1784/dyno%20inc%20small.JPG

[Snoopy81]

I love dyno inc

[cole]

now that jamie is gone my new project willl go there

:thup::thup: to matt

[Grease Monkey]

I can't praise the guys at Dyno Inc. enough. big :thup: to them!

[evolve]

Bump for Dyno Inc!!! I got some tuning done yesterday and they the guys there were awesome! Matt, nice job tuning my EVO and Darius put my Lower IC pipe back when it popped off:thup: (26lbs will do that, lol). Overall very fast service, and a TON of patience. I definately recommend these guys!

[EGbobby]

can i get a price on 3 dyno pulls for a 2000 hatch.?

[Hatch Man(GsR)]

$50.00 for 3 2wd pulls

[Grease Monkey]

Bump for Dyno Inc!!! I got some tuning done yesterday and they the guys there were awesome! Matt, nice job tuning my EVO and Darius put my Lower IC pipe back when it popped off:thup: (26lbs will do that, lol). Overall very fast service, and a TON of patience. I definately recommend these guys!

It was nice meeting you there, sweet EVO!!

[thermal]

Good people there.....

[1ns0mniac]

So MJ is the website ever gonna be put up??

[ZeroMR]

I went there Saturday and they are a lot more knowledgable then the shops I've been to before. Good thing I went , my dyno graph looked pretty ugly after being tuned at a local shop that I will not be going back to ever again. As soon as my new turbo comes in I'm going back to get tuned there :thup:

[Homemade WRX]

looks like I missed all the fun this past saturday. stupid ODU homecoming!!

[cmeGTsme]

got my motor mounts done there, cool ass people...and im bout to get my gsr tuned there , after i get my cams and shit..... thumbs up to everyone at dyno inc

[blackevo110]

thanks we all appreciate it!

[phxaz]

So MJ is the website ever gonna be put up??

Im working on it slowly. No time with the Holidays. http://www.dynoinc.net

[Homemade WRX]

Im working on it slowly. No time with the Holidays. http://www.dynoinc.net

my name has one 'c' ;)
-Micah

[phxaz]

my name has one 'c' ;)
-Micah

Shaddap, I have 2 in my phone. Lol, ill fix it.

[1ns0mniac]

WORD!

[blackevo110]

what the crap? im not on there.

[eTHeR]

What do you guys at Dyno Inc. prefer to use when tuning DSMs? I have a 95Talon and I want to know what the tuner prefers before I buy my engine management? DSMLink? Apexi SAFC?

Just wondering

Any insight would be most helpful.

[Wrecked R6]

dsmlink

[eTHeR]

Damn that was quick you guys are the shiz thanks for the quick response. DSMLink it is. I'll be down as soon as my car is ready to be tuned.



THANK YOU

[stun zeed]

awesome people to work and hang around with. i'll definitely be back for more work done. Good Job Guys!

[JAvenger]

hahaha you pay for what you get with that mustang dyno! hahahaha

guys are somewhat cool, that lithuanian (sp) you have working for you. looks like fat bastard. just joking (no i'm not).

[Homemade WRX]

Jay, when are you going to run on the dyno?
well, you have your happy numbers ;)

[matthew bryduck]

you guys tune megasquirt???

thanks

[SmallBlock_DC2]

Tune chrome??

[Wrecked R6]

yes sir and yes sir give me a call and well set up a time. 757-493-3555 thanks mj

[N/A POWERED]

Dyno inc.= best shop in the area, thanks for the ls ecu MJ

[93sr-5ftw]

dyno inc ftw! Havent actully had a chance to go to the shop yet, but have gone to streetwars with some of you guys, micah(sp) mj, pete, once the 240 is game ill be heading your way

[Hatch Man(GsR)]

hey ya definately come out for some tuning when the 240 is running and you wont be disappointed...

[93sr-5ftw]

yea im in the process of force feeding it, plus im paying for everything, so like all other car owners, im poor

[Homemade WRX]

hey, someone spelled my name right :D

-Micah

[judge]

hey, someone spelled my name right :D

-Micah

wrong your name is spelled "big ass head"

[Homemade WRX]

wrong your name is spelled "big ass head"
:lol:
that's the middle name

[blackevo110]

...im never cool enough to be mentioned or around when the fun shit happens. damn...

[blackevo110]

MJ is my bitch...

[93sr-5ftw]

blackevo, didnt you race pete, that night from streetwars, when the evo was running like ass?

[Wrecked R6]

steves car is ass. and yes he holds dudes balls for a living

[blackevo110]

yea but not on the track y?

[blackevo110]

as for MJ...youre just lucky i like you.

Punk.

[93sr-5ftw]

i was asking, because i was camera bitch that night, when the subie raped your evowned, and when pete was pulling on you

[Wrecked R6]

i was asking, because i was camera bitch that night, when the subie raped your evowned, and when pete was pulling on you. 240sxftw

hahahaha thats funny

[blackevo110]

i was asking, because i was camera bitch that night, when the subie raped your evowned, and when pete was pulling on you. 240sxftw


yea...youre right...

of course when youre boosting at 15-18psi and youre tuned for 25 and your a/f go fat youd prolly admit your cars was running like ass to. found out the next day my cat was blown to pieces and the front honeycomb was clogging the second one.

raped my car? ...hm, not so much. i just cant drive. and when did pete pull on me? its on video, can i see it too?

yea i remember you. you were that acne crusting kid weren't you? with the goofy ass curly hair or some sh!t? yea...youre the hotshot that knows everything about cars. duh, i cant forget "the camera bitch". hows things?

[93sr-5ftw]

haha i havent seen the video, but we were pulling on you, and im glad that you recognize that i know more about cars than you do, thats respect, just kidding i dont know jack shit, and for the record, you where looking in the mirror when you where talking about acne crusting because thats not me, maybe you where thinking of the tall blonde kid, i dunno, but i do have curly hair. and i wouldnt be driving an evo, since ive seen how shitty they are in real life subies for the win, oh and flame on, hater

[Jay]

Somebody from Dyno Inc. please call me on the cell and if I do not answer, leave a number where a real person will pick up the phone.

757-971-3545

Thanks,

- Jay

[Wrecked R6]

your call was returned

[Jay]

Thank you for the call! My schedule is super crazy and I have to plan by the hour sometimes. See you tomorrow.

[sick89six]

PM'ed the guys from dyno inc. They sound really Helpfull and knowledgable. I look forward to doing business with them.

[Homemade WRX]

pm'ed you back

[svairman]

Do you tune SAFC Neo and what would you recommend for tuning a 240sx w/a sr20det?

[idriveahonda]

Had work done by Tim there the other day. Did a great job, quick and easy even though it was pretty simple.

MJ is a great businessman, ALWAYS helps with anything I need. Thanks bro.

[AllMtrRacin]

yeah I've known Chris for sometime now, an since he's been over here at Dyno, him an MJ have helped me out big time!!! thanks guys, the favors WILL be returned!! As soon as the dust settles from me buyin my house, i plan on buildin a new car! Like i said, i've known Chris for sometime, an i have seen his work...in my opinion, he's one of the best tech's in the 757. He will have the contract on my next build :thup:

[duglas]

Hey DYNO Inc.. Do you have fans for side mount intercoolers??? I want to get my S4 dynoed but really need some air on the SMIC's...

[Homemade WRX]

yeah, we have several small fans that we use for side mount and top mount intercoolers.

[Jakers]

do u guys like to work on teal civic hatchbacks, the only reason i asked is because i raced this teal civic hatchback and he had dyno inc stickers on it and he roasted my ass, it sounded like a single cam, i have a gsr fully built hatch and i think he had just a single cam, but i have no idea whats in that think but he toasted me. so now i think i am going to trade my gsr swap straight for a single cam, they are just way faster. the guy who driving the hatch said his name was travary, he said it was his friends car. i think they were gay lovers or something because the black driving smelt like straight poopie and i was 10 feet away from him. oh yea i hate big head dudes who drive white imprezas with wrx swap who hang out with guys named mj.
bye

[Homemade WRX]

Jake, you are a moron and your teal hatch is slow as balls... :p

[Von]

do you guys troubleshoot and stuff? i might have to end up takin my car somewhere else if my current tech cant figure out the problem. i know jake from school. how much do you guys charge to just diagnose lol?

[Homemade WRX]

give us a call at the shop and we can talk it over with you...
493-3555

[Fathonda]

all i know is , i call 1 day and ask a question old boy gives me a straight answer. i care about not being bullshitted and they don't toss any nonsense my way. i respect that , i have them pricing out a b18b rebuild and full swap. all i can say is if they do business like this with me then i will bring my business nonstop. much respect to dyno inc thus far , i will fill you in when business is complete. phone tag sux though , sorry guys

[Grease Monkey]

Just ordered some more goodies from them.. Great people to deal with. They will be tunning my hatch when the rest of the stuff gets here and will be tuning my new project as well ;)

[Jakers]

WWW.DYNOINC.NET


still in works, will have forum and lots more to come soon!

[....AJ....]

You guys do dyno flashes don't you?

[Jakers]

do u mean reflash, and if so then yes.

[....AJ....]

Have you gotten good numbers from any so far?

[Jakers]

Yes alot of good numbers but that all depends on what you have done to your motor. If its stock then theres only so much u can pull out of stock motor. No lets say in fully built na or even turbo charged then you can get great numbers. It just depends on what mods you have.

[evolve]

Id let them tune my car, Ive spoke to Keenan, seems knowledgeable about 4g63s, let him tune it then tell everyone what you made!

[....AJ....]

I have a few mods i'll be doing soon. So I'll be back up there. I know you guys are scared of doing Evo clutches though LOL!!!!! Hey evolve check pm.

[Jakers]

Evo Clutches are dynoIncs speciality

[99EJ6T]

they got my car right now....hope to get it back from them soon, but they seemed like good people

[Homemade WRX]

Have you gotten good numbers from any so far?

we do reflashes on subaru's and evo's with our software...if software is supplied and we know the interface, we will and have tuned it...
the gains you see really depend on what mods are done to the car. how far past the factory parameters you really are.
The most powerful sti reflash we've done made 420 hp 480 lb-ft on our dyno and 477 whp and 534 on a land & sea...so there is lots to be had with factory ecu's

PM me what do you have done to your evo...I can get a you ball park gain or get you close comparison to another car we've done

[Jakers]

WWW.DYNOINC.NET

If you have any other questions check our web site out and we have a link to our email on the home page.

thanks.

[Grease Monkey]

That's one gay civic in that video on your site..

[Jakers]

hahahaha, we felt sorry for him so we put him on the home page.

[Physics]

Out of curiosity, what kind of tuning software and what not would you use on a 2001 Chevy S-10. Engine is 4.3L V6 with a Procharger trying to push 10psi. Right now I have an FMU setup on it, but I'm planning on changing it over to a fuel rail setup so I don't have to use that.

[VaGambler]

I did not see any "REAL" cars there , hahahah


where are a few pics of RX- 7 's

Va

[Homemade WRX]

Out of curiosity, what kind of tuning software and what not would you use on a 2001 Chevy S-10. Engine is 4.3L V6 with a Procharger trying to push 10psi. Right now I have an FMU setup on it, but I'm planning on changing it over to a fuel rail setup so I don't have to use that.

well, I know a lot of our domestic customers like HB tuners...but I'm not sure if they have anything for you...I can look into it if you would like.
I personally preffer standalones...be it plug and play or wire in over the factory ecu.

[blackevo110]

sweet the site is up and running, at least to some degree...

[UberJag]

Thanks to the guys at DynoInc. My car was dropped off in the morning ,work was doen quick and clean, also they cleaned my car inside and out. Very Good Customer Service. Will do business again!!!!!!!!

[....AJ....]

Once I get all my exhaust and the rest of my mods on, I'm thinkin about coming up there for a tune.

[Jakers]

sweet the site is up and running, at least to some degree...

Yea, i am going to spend one night this coming up week cleaning it all up, and redoing some things.

[blackevo110]

good...i see the bastard of the shop is almost nowhere to be seen either...lol

[rokmarines]

yea these guys know what there doing im getting my 1990 integra changed to obdo to obd1 for a very good price.cant wait till i get my parts in...and they are tuning my car and putting it on the dyno so it runs the way i want it to not many shop will do that for the price they gave me.:D thanks dyno inc. Min Pang P.S. im about to be there best customer.:cool:

[lLOlRlElN]

Im a little late on this...

I had some ecu trouble with my caR so i took it to them for the chrome ecu chipping and tuning deal. needless to say they spent damn near 2 hours working on my shit trying to get it running good. it wasnt tuning on the dyno but it was all i needed to get done and for the cost of it all it didnt even make any sense for the amount of time they spent. such a good deal

[vdubya63]

I didnt see any nissans? Do yall got any sr20 experts lol...I tried calling today but damn that phone stays busy

[SupraDOc]

...Any update on the 04 STi race ALK I ordered last year???

[Homemade WRX]

...Any update on the 04 STi race ALK I ordered last year???

Jon, I'll PM you my phone number...I never knew that didn't get taken care of.

as for the phone, we only have one line and it stays busy all day...so keep trying.

[viper24]

is the dyno a dyno jet?

[Grease Monkey]

is the dyno a dyno jet?

It's a mustang Dyno

[Jakers]

How are my little guys doing?

Do yall need a belly rubbing?

kisses

[....AJ....]

Evo Clutches are dynoIncs speciality

bwahahaha sorry i had to laugh at that one. :D

[black6gen]

Just got my car back from them, and even though i had to pay them for fixing someone else's mistakes, I can't wait to go back and get Tuned!

Bottom line great guys willing to help out as much as they can.:D

[Jakers]

Website Update*

[DecentCivicZ6]

these guys have a website??

[Jakers]

Yes, its still a work in progress. WWW.DYNOINC.NET

[MORE IMPATIENT]

i give them a thumbs up, helped me get my car to where it needed to be, all nice people and ill be going back in the future.

[black6gen]

Going to get tuned there 2day!

[89 cRiX Si]

Going to get tuned there 2day!


good luck, let me know how it goes

[ls/vtecstitch]

great group of guys. P.S. thanks for holding onto my railroad spike for me!

Rob

[notenoghmy]

awesome guys and fast work. Highly reccomended for anyone looking for tuning or anything aftermarket. I got a kickass deal on a new wastegate and tuning. thanks again guys!!!!

[MajorsEF]

anyone know how much to get tuned there on dyno for about an hour?

[MORE IMPATIENT]

i believe its 150 an hour, they did my car and it runs great, smooth, and still gets 31mpg with some 550's in there, mj took the time to low throttle tune it and i was very happy with that. ill be going back soon to turn up the boost when i get some bigger injectors.

[Homemade WRX]

yes, it is $150 an hour for tuning.

[12secondeg]

Im getting my turbo installed on my gsr eg by Dyno Inc. and my clutch and so far they have answered all of my questions and are quick. They've been very helpful. I will update tomorow or Saturday when the car is done and tuned. I can't wait!

They got my car done quick and the whole crew was very helpful. They told me what parts I needed and I listened and now I am very very happy. They will lead you in the right direction. Its not even worth getting parts off of Ebay when you can deal with these guys. I am going to end up having them take care of EVERYTHING related to building my motor. Great prices too! Thanks so much---now my vadriven name speaks the truth!


BTW Dyno Inc.... I havent gone faster than 65mph and I dont plan on it! Oh, and I will be back shortly for a guage setup.

[blackevo110]

good to see this thread hasnt died yet.

[....AJ....]

I'll be up there in the next couple of weeks to get mine tuned. I was gonna mod it more, but nah not right now. I need to touch up the exterior.

[Tapanass]

Ive never had a problem at DYNO INC. good guys all the way around, they have done a lot of work for me to and they know their shit, thanks once again DYNO!!!!!!!!

[Tapanass]

i believe its 150 an hour, they did my car and it runs great, smooth, and still gets 31mpg with some 550's in there, mj took the time to low throttle tune it and i was very happy with that. ill be going back soon to turn up the boost when i get some bigger injectors.

I remember that day, i was there and they were mad quick, i even got my car in for a tune and dyno to.

[Grease Monkey]

They are all a good bunch of guys at Dyno Inc.. They should be tuning the new setup in my hatch in the next few weeks :devil:

[hwany00007]

anybody has experiend hondata kpro tune from them?

[Wrecked R6]

Weve done quite a few i can show you dyno graphs.

[euthorus]

I need my headers put on then get a flash - have you guys done any 35DET Altimas ?

[Dyno Inc]

Dyno Inc. is under new management as of this coming week. The previous manager, whom will remain un-named, has quit for the best interest of both themselves as well as Dyno Inc.

If you have any questions, feel free to drop us a line at dynoinc at gmail.com or give us a call... 757-493-3555.

We are usually in the office/shop from 10AM until 6PM.

Thanks,
Dyno Inc.

[painterballer]

Dyno Inc. is under new management as of this coming week. The previous manager, whom will remain un-named, has quit for the best interest of both themselves as well as Dyno Inc.

If you have any questions, feel free to drop us a line at dynoinc at gmail.com or give us a call... 757-493-3555.

We are usually in the office/shop from 10AM until 6PM.

Thanks,
Dyno Inc.

even on weekends?

[<3Haters]

They are closed sundays and mondays.

[H22A-DA]

had a bad experience with them throwing my friends built gsr together so fast it had blown head gasket, timing off 6 teeth, and oil pick up bolts werent torqued down so they fell off and made the car lose oil pressure, and this is all in the break in period with less than 100 miles on the car, they wouldnt pay for anything becuase of no warranty on performance parts............go to millenium or abacus

[Gold Eg]

damn 11 pages now........

[coolva]

had a bad experience with them throwing my friends built gsr together so fast it had blown head gasket, timing off 6 teeth, and oil pick up bolts werent torqued down so they fell off and made the car lose oil pressure, and this is all in the break in period with less than 100 miles on the car, they wouldnt pay for anything becuase of no warranty on performance parts............go to millenium or abacus

Uh, I built that motor... and I can assure you no bolts were left loose, nor was the timing off... if the timing was so far off, then the valve lash woulda been way off too... (crank at TDC, set lash #1, 180 deg, set lash #3, 180, #4, 180 #2)

The reason we will not warranty anything is b/c we did not install it into the car. I've built motors for people and they go home, install it, hook shit up wrong, call up complaining, bring it in, only to find out (actual examples) wires hooked up wrong, coolant lines going to the intake, etc...

I build about 90% of the motors at Dyno Inc. Ask some of the customers, I am extremely meticulous about everything I do.


I dont think there has been a single motor that i have built for a customer that has blown up. There is one that i can think of, but from the looks of the oil pan, he never changed the oil, and said his oil light came on... (uhh, pull over???)

Sorry for the rant, but sayin the motor was built incorrectly, I take that as a direct insult. Just the way I am.

As for dyno inc tuning... I cant think of too many people (im sure there are some) who daily drive a honda with 500hp (b-series at that)... and thats on 93 octane... If anyone doubts the car, please let me know... because, again, I built the motor, turbo manifold, full 4" exhaust, charge piping, ect.... and tuned it...

Now, I do owe Darius quite a bit for the knowledge.... ;)

[H22A-DA]

Uh, I built that motor... and I can assure you no bolts were left loose, nor was the timing off... if the timing was so far off, then the valve lash woulda been way off too... (crank at TDC, set lash #1, 180 deg, set lash #3, 180, #4, 180 #2)

The reason we will not warranty anything is b/c we did not install it into the car. I've built motors for people and they go home, install it, hook shit up wrong, call up complaining, bring it in, only to find out (actual examples) wires hooked up wrong, coolant lines going to the intake, etc...

I build about 90% of the motors at Dyno Inc. Ask some of the customers, I am extremely meticulous about everything I do.


I dont think there has been a single motor that i have built for a customer that has blown up. There is one that i can think of, but from the looks of the oil pan, he never changed the oil, and said his oil light came on... (uhh, pull over???)

Sorry for the rant, but sayin the motor was built incorrectly, I take that as a direct insult. Just the way I am.

As for dyno inc tuning... I cant think of too many people (im sure there are some) who daily drive a honda with 500hp (b-series at that)... and thats on 93 octane... If anyone doubts the car, please let me know... because, again, I built the motor, turbo manifold, full 4" exhaust, charge piping, ect.... and tuned it...

Now, I do owe Darius quite a bit for the knowledge.... ;)

im not going to argue about it , just stating the facts, and everything i said was wrong WAS wrong with the motor until my boy fixed everything, (he guy that should have built the motor in the first place)fgured a shop would do a good job on it so he didnt want to chance having my friend build it......boy was he wrong!!! as for the oil light he never started or drove the car after that, he is very meticulous and takes very good care of both of his acuras. We did find out what was the problem when we dropped the oil pan to check the rod bearings,...............the nut holding the oil pick up was missing!!! Like i said im not arguing about it just stating the facts. After trying to get yall to fix the leaking headgasket he had to pay 300 for yall to put a new headgasket on, so then after that it wasnt even worth calling dyno inc back for yall to fix things that were paid to have done right in the first place.

1. motor would not start upon swapping the motor in
solution (timing off) fixed and fired right up

2.headgasket leaking antifreeze decent
solution (taken back to dyno inc paid 300 to fix)

3.oil light coming on after about 100 easy driven break in miles
solution ( oil pan taken down and oil pickup nut missing )
- car has 300 miles on it now and running good on all motor break ijn(thanks Dyno Inc.)

[Grease Monkey]

coolant lines going to the intake

That is the most awesome shit ever! Hahahahahahahahahahahahahahahaha

[NasTHatch]

I build about 90% of the motors at Dyno Inc. Ask some of the customers, I am extremely meticulous about everything I do.


As for dyno inc tuning... I cant think of too many people (im sure there are some) who daily drive a honda with 500hp (b-series at that)... and thats on 93 octane... If anyone doubts the car, please let me know... because, again, I built the motor, turbo manifold, full 4" exhaust, charge piping, ect.... and tuned it...

Now, I do owe Darius quite a bit for the knowledge.... ;)

i will vouch for Tim and Darius, all day everyday, they never built any of my motors, but Tim tuned my b20vtec hatch, my high compression GSR, and my SI, and Darius has hooked me up with a ton of parts, i have seen Tim build motors and he has never rushed one, or thrown something together......and speaking of which im coming back to get my si re-tuned Tim, i got a new turbo and wastegate.....

[coolva]

i will vouch for Tim and Darius, all day everyday, they never built any of my motors, but Tim tuned my b20vtec hatch, my high compression GSR, and my SI, and Darius has hooked me up with a ton of parts, i have seen Tim build motors and he has never rushed one, or thrown something together......and speaking of which im coming back to get my si re-tuned Tim, i got a new turbo and wastegate.....

I just got your voicemail.... call us tuesday...

[<3Haters]

I just got your voicemail.... call us tuesday...


I will be calling as well. And I love my GT35R and all the work you and Darius did. Always great work, they treat your car as if it's their own. Dyno Inc. will be the only shop I ever visit. Vouch all day everyday.

[Gold Eg]

deff. vouch!!!!!

[Tri]

darius bought me mcdonalds one time

[NasTHatch]

darius bought me mcdonalds one time

that's all he ever buys

[<3Haters]

that's all he ever buys

Pizza.

[hctahsl]

we went got quiznos SHIT WAS BANGIN

[WYT R1CE]

Whats dyno tuning rate with safc?

[NoTorque]

when is your next dyno day, if you dont have one planned within 45days or so, how much for 2 or 3 pulls. I am needing to get a baseline on my RX8 with the current mods before I start doing major crap.....you know, see if it really works.

[coolva]

Whats dyno tuning rate with safc?

$150/hr

[coolva]

when is your next dyno day, if you dont have one planned within 45days or so, how much for 2 or 3 pulls. I am needing to get a baseline on my RX8 with the current mods before I start doing major crap.....you know, see if it really works.

This coming saturday... normal business hours... open noon till 8pm :)

[Cmqqn85]

A buddy of mine had his gsr turbo hatch tuned there, he said great things about the employees and service. Only bad thing is he had a few thousand dollars of quality stuff stolen off of his car (SPARCO seats, wheels, radio, etc.) because he had to leave it over night and it was pretty much left at that.

[idriveahonda]

A buddy of mine had his gsr turbo hatch tuned there, he said great things about the employees and service. Only bad thing is he had a few thousand dollars of quality stuff stolen off of his car (SPARCO seats, wheels, radio, etc.) because he had to leave it over night and it was pretty much left at that.

And when was this?

Pm me if you would like.

[green03fairlady]

a couple questions i have a 350z 03 model and i bought a 4.08 final drive for it hear its not something to install unless you know what your doing wondering if yall would be able to install it and for how much..
my other question is i have a couple things done to the z was wondering how much it would cost to tune i seen its 50 for three pulls but i didnt see how much for a tune ...thanks ahead of time and could u pm me the info..

[Fathonda]

if you guys do swaps , how much for b20[obd2] swap into a 99 civic ex sedan. want to use the ls tranny if possible. let me know , thanks.

[NasTHatch]

if you guys do swaps , how much for b20[obd2] swap into a 99 civic ex sedan. want to use the ls tranny if possible. let me know , thanks.

they do swaps, give them a call instead of asking questions on drag,

757 493-3555

darius and tim have helped me out so many times, and i have never had issues with these guys, they do great work, and help out any way they can

[LSVTECEG757]

darius and tim have helped me out so many times, and i have never had issues with these guys, they do great work, and help out any way they can

i have

[NasTHatch]

i have

you have had issues or helped me out?

[coolva]

you have had issues or helped me out?

He has a personal issue w/ someone there... not with the shop... just FYI... :)

[Tri]

Dyno Inc. = great people and awesome prices

[Kris.Is.Foamin]

Dyno Inc. = great people and awesome prices

LOL, they wanted to charge me $50 to take my (already out of car chipped ECU) and change the rev-limiter.

Not to mention the three bills to fab a downpipe.

No thanks.

[sung]

Tim, you working at dyno, inc. now?

[NasTHatch]

He has a personal issue w/ someone there... not with the shop... just FYI... :)

oh, word man, you guys know that i have never had any issues with DYNO INC,. and its been almost 4 years that i have know you and the rest of the guys at Dyno inc.

[coolva]

Tim, you working at dyno, inc. now?

been there since 07... :)

[Grease Monkey]

Tim and Darius are good people.. Always gone out of their way to help me.

:thup:

[Tri]

Tim tuned my car who wants some ?! : )

[NasTHatch]

Tim tuned my car who wants some ?! : )

what do you got? and what track do you want to run at?, tim has tuned a couple of my cars over the past four years....

[coolva]

Tim tuned my car who wants some ?! : )

well.. you prolly should get them axles to stop snappin :)

[Homemade WRX]

its been almost 3 years that i have know you and the rest of the guys at Dyno inc.

figured I'd help with the math ;)

[Gman757]

There good people, I tuned my car there.

[NasTHatch]

figured I'd help with the math ;)


oh shit i forgot Dyno inc. opened while i was in the Marines, and i didn't meet any of you until i got out in 06......damn, well shit it feels like its been forever.....

WTF have you been up to?

[GlfDaddy]

I have always had a good experience with them. Tim went out of his way for me several times before. He had chipped an ecu for me for $60 bucks and fixed all my electrical issue with the ecu wiring harness at no charge. took about 2 hours and didnt charge me a thing. Not to mention this was when i first met him. good peoples there.

[Tri]

what do you got? and what track do you want to run at?, tim has tuned a couple of my cars over the past four years....

im in the n/a class haha

[Homemade WRX]

oh shit i forgot Dyno inc. opened while i was in the Marines, and i didn't meet any of you until i got out in 06......damn, well shit it feels like its been forever.....

WTF have you been up to?

me? I haven't been there since May 07. Got tired of all the drama and BS with the shop...then after i left shit hit the fan, which I'm glad I avoided though some parties tried dragging me into.
So I've moved on. Regardless, still glad to see Timmy and Darius have a place to go to work. Especially Darius as Matt had just talked him into coming over when everything fell apart ;)

[Tundradrenalin]

Very cool low key shop. Wouldn't have known it existed with this forum.

[b-ron]

IS THIS PLACE STILL IN BUSINESS I HAVE BEEN LOOKING FOR A PLACE TO DYNO MY MUSTANG HERE IN VIRGINIA BEACH. I CALLED THE # BUT NO ONE ANSWERED, IF THEIR IN BUSINESS DO YOU KNOW WHAT THEIR HOURS ARE

[nftuatn]

IS THIS PLACE STILL IN BUSINESS I HAVE BEEN LOOKING FOR A PLACE TO DYNO MY MUSTANG HERE IN VIRGINIA BEACH. I CALLED THE # BUT NO ONE ANSWERED, IF THEIR IN BUSINESS DO YOU KNOW WHAT THEIR HOURS ARE

for the second time that i know of....turn your fucking caps off....is it that damn hard...??????????

[coolva]

IS THIS PLACE STILL IN BUSINESS I HAVE BEEN LOOKING FOR A PLACE TO DYNO MY MUSTANG HERE IN VIRGINIA BEACH. I CALLED THE # BUT NO ONE ANSWERED, IF THEIR IN BUSINESS DO YOU KNOW WHAT THEIR HOURS ARE

Tuesday through Saturday... 12noon to 8PM

[shonanspeed]

I just made an appointment for Friday. They seemed really professional and the fact that I'm using an obscure EMS didn't phase them. I'll let everyone know how it went.

[00civicman]

how much for a tune using hondata

[Satan]

Shops locked up. The orange supercharged 350z with the license plate "Zealous", your windows are down and we covered the car up. Anyone with any cars or parts should go down there and attempt to get it back. Some cars are sitting outside, some are locked up inside.

[nftuatn]

Shops locked up. The orange supercharged 350z with the license plate "Zealous", your windows are down and we covered the car up. Anyone with any cars or parts should go down there and attempt to get it back. Some cars are sitting outside, some are locked up inside.

wtf????

more details man...

[nftuatn]

is it locked because they are closed for the night???

or is there a sign that says were closed forever???

someone go get pics

[Satan]

wtf????

more details man...


is it locked because they are closed for the night???

or is there a sign that says were closed forever???

someone go get pics



Sign on the door that states that they are locked out due to something about not paying rent. When I go back up there I will post pictures of the sign. It's all locked up. It doesn't say "we're closed forever", but it's a note from the person who locked it up or the landlord. Your best bet is to talk to darius on his cell or maybe hit him up on myspace or some sort of email. It's been locked up since monday

[nftuatn]

i dont have anything up there...i was just thinking about all they peoples cars that are up there...

[H22A-DA]

Sign on the door that states that they are locked out due to something about not paying rent. When I go back up there I will post pictures of the sign. It's all locked up. It doesn't say "we're closed forever", but it's a note from the person who locked it up or the landlord. Your best bet is to talk to darius on his cell or maybe hit him up on myspace or some sort of email. It's been locked up since monday

Karma coming back around!!!!???!?!?!?

[Satan]

How is that Karma? If you're referring to Matt, he was a shitty shop guy. He broke shit so you would have to pay to have it fixed. He pushed shit so far past the limit on the dyno just to see you dish out more cash to get it fixed. Matt being shitty, I agree with. Darius is a cool guy and a great worker. Same with Lamar. I don't know tim too well, but he seemed alright. So if by "Karma" you are referring to "Matt's stupid car games"...then I'd say your decision is slightly misplaced.

[lamonte619]

hello my name is lamonte and i work at DYNO INC. WE ARE NOT CLOSED SO PLEASE STOP WITH THE RUMORS. we are in the process of signing a new contract on our building and we are still in the process of moving things around. if you have not been to our shop in a while we have even moved our dyno to another room but we our still open just need to get some contracts straight and some things moved. so for all the haters kept haten cause we still here. so to mr. satan chill out man. and why were u checking out all the cars anyways we do have cameras and they do work very well. to all customers please bare with us but our shop is not closed and we will be back open with an upcoming dyno day real soon thank you.

[Satan]

My bad. PM sent. Must has misread the paper on the door.

[vw4clyd]

hello my name is lamonte and i work at DYNO INC. WE ARE NOT CLOSED SO PLEASE STOP WITH THE RUMORS. we are in the process of signing a new contract on our building and we are still in the process of moving things around. if you have not been to our shop in a while we have even moved our dyno to another room but we our still open just need to get some contracts straight and some things moved. so for all the haters kept haten cause we still here. so to mr. satan chill out man. and why were u checking out all the cars anyways we do have cameras and they do work very well. to all customers please bare with us but our shop is not closed and we will be back open with an upcoming dyno day real soon thank you.

Yeah man I was wondering cuz I was calling up there but nobody was answering the phone, so I went up there and there was nobody in site. I was trying to get in contact with you because I took my ecu to be base maped and you all fried my ecu. I bout a new one in hopes that you all would correct it...

[H22A-DA]

Yeah man I was wondering cuz I was calling up there but nobody was answering the phone, so I went up there and there was nobody in site. I was trying to get in contact with you because I took my ecu to be base maped and you all fried my ecu. I bout a new one in hopes that you all would correct it...

.

[ZweetdreamZ]

WE ARE NOT CLOSED.....to all customers please bare with us but our shop is not closed and we will be back open with an upcoming dyno day real soon thank you.

So which is it? Your not closed or you will be back open?

[Satan]

So which is it? Your not closed or you will be back open?

What I'm saying is, I hope you don't own the Orange supercharged Z. But I saw someone managed to get the windows up. Lamonte, when can I come and get my silencer back? I need it on. As well as my base exhaust.

[nftuatn]

well are they open or closed???

im sure some customers are on here and wonder what/where their cars are...

[Satan]

I'm not going to say without being scrutinized, really. But the way it looks, the front door has been locked since this past Monday. Interpret that as you may.

[lamonte619]

LISTEN MAN WE ARE NOT CLOSEDIF U HAVE ANY QUESTION ABOUT UR CAR OR A PART U HAVE UP THERE FEEL FREE TO CALL ME AT 7572185664

[Kris.Is.Foamin]

LISTEN MAN WE ARE NOT CLOSEDIF U HAVE ANY QUESTION ABOUT UR CAR OR A PART U HAVE UP THERE FEEL FREE TO CALL ME AT 7572185664

I wouldn't yell at yo custamarssss.


Lol, this whole locked up shit is weak.

Dyno gay tried to rip me off quite a few times, and the encounters that I've had with them are all horrible. Went once to get an estimate on Charge pipes/ DP. Well, needless to say they had no fucking idea what they were doing. One person wanted to cut off the wastegate flange and move it because he said the dumptube wouldn't clear. Heh, even though the dumptube that did fit was in the box I brought them. That and they wanted almost $800 for the charge pipes/DP- and they were welding egay pipes.

Also I had a chipped ecu that I needed a basemap thrown on. Apparently they needed a week and I can't remember the outrageous price they quoted me.

This shit's weak, because Dyno Inc is a sketchy business, run by sketchy people.

[NasTHatch]

I wouldn't yell at yo custamarssss.


Lol, this whole locked up shit is weak.

Dyno gay tried to rip me off quite a few times, and the encounters that I've had with them are all horrible. Went once to get an estimate on Charge pipes/ DP. Well, needless to say they had no fucking idea what they were doing. One person wanted to cut off the wastegate flange and move it because he said the dumptube wouldn't clear. Heh, even though the dumptube that did fit was in the box I brought them. That and they wanted almost $800 for the charge pipes/DP- and they were welding egay pipes.

Also I had a chipped ecu that I needed a basemap thrown on. Apparently they needed a week and I can't remember the outrageous price they quoted me.

This shit's weak, because Dyno Inc is a sketchy business, run by sketchy people.

i have known the guys at Dyno inc. since they opened, and have never had any issues with them, they have always been more than willing to help me out.

Darius, Tim and Lamonte, are always hooking me up with some crazy ass deal, and i can always count on them to have a part i need, and if they don't have it in hand they can almost always find it quickly for me,

[quick26]

i have known the guys at Dyno inc. since they opened, and have never had any issues with them, they have always been more than willing to help me out.

Darius, Tim and Lamonte, are always hooking me up with some crazy ass deal, and i can always count on them to have a part i need, and if they don't have it in hand they can almost always find it quickly for me,


that goes for any shop. i know people that can go to the same shop as me and get tuning done for almost half of what it would cost me or get a killer discount on parts that i would not get. its not what you know but who you know. i am sure if i was up someones ass enough i would get "crazy ass deals" as well. not trying to discredit you or this business, its just how most private owned businesses work.

[H22A-DA]

I wouldn't yell at yo custamarssss.


Lol, this whole locked up shit is weak.

Dyno gay tried to rip me off quite a few times, and the encounters that I've had with them are all horrible. Went once to get an estimate on Charge pipes/ DP. Well, needless to say they had no fucking idea what they were doing. One person wanted to cut off the wastegate flange and move it because he said the dumptube wouldn't clear. Heh, even though the dumptube that did fit was in the box I brought them. That and they wanted almost $800 for the charge pipes/DP- and they were welding egay pipes.

Also I had a chipped ecu that I needed a basemap thrown on. Apparently they needed a week and I can't remember the outrageous price they quoted me.

This shit's weak, because Dyno Inc is a sketchy business, run by sketchy people.

+1 They tuned my B16 turbo and it blew in one month , also they built a fully built motor for my boy and left the oil pick up loose ! Also they didn't torque the head down correctly and my boy had to go through and tighten up all the loose ends. They charged him to do another headgasket $300 bucks and it blew again. My boy got a real mechanic to work on it and found that they pryed the head off with a prybar and left dents on the deck causing all of it. Keep in mind this a fully built motor that he paid top dollar for them to build. Also, they never answer the phone all the time when he would call and ask them about it. Also, the motor went in with type R cams and left with GSR's. SKETCHY, and this guy Lamonte is the helper dude that sweeps the floors . Thats the only experience I have had with them and never will have another.

[SortaSUNK]

Sign on the door that states that they are locked out due to something about not paying rent. When I go back up there I will post pictures of the sign. It's all locked up. It doesn't say "we're closed forever", but it's a note from the person who locked it up or the landlord. Your best bet is to talk to darius on his cell or maybe hit him up on myspace or some sort of email. It's been locked up since monday

Jeeeeeeeez I wonder why.

[lamonte619]

+1 They tuned my B16 turbo and it blew in one month , also they built a fully built motor for my boy and left the oil pick up loose ! Also they didn't torque the head down correctly and my boy had to go through and tighten up all the loose ends. They charged him to do another headgasket $300 bucks and it blew again. My boy got a real mechanic to work on it and found that they pryed the head off with a prybar and left dents on the deck causing all of it. Keep in mind this a fully built motor that he paid top dollar for them to build. Also, they never answer the phone all the time when he would call and ask them about it. Also, the motor went in with type R cams and left with GSR's. SKETCHY, and this guy Lamonte is the helper dude that sweeps the floors . Thats the only experience I have had with them and never will have another.

ok so we have a hatter LOL. come on man for real. yea i sweep the floors. i also take the trash out, do exhaust work, run the dyno and anything else they have me do cause im the lowest "ranked" or whatever u wanna call it guy there. so what everyone has to start some where. im also going to school to be a mechanic. but enough about me ur "boy" with the black integra we told him to send us pics.... he never did.... he knows we waranty our work he only called once so okay we cant see what was wrong unless we can c what went wrong and if it was our fault. as far as the cams go we dont need type r cams..... REALLY.. we can go buy some dont need to still them. my point is if u dont like us ok dont bring ur car there. NOT HURTIN US. dont like our dyno then put it on a dyno jet. every shop has a customer that has complaints so whats new thats all apart of having a business. why hate on a shop for. if our tunner tunes a car and the tire pops going down the street they blame the tunner cause the tire was fine before it cam to our shop come on man be real. it will always be something. NOBODY CAN MAKE EVERY BODY HAPPY THERE ALWAYS A HATTER

[lamonte619]

SPEAKS FOR THEMSELVES

http://www.youtube.com/watch?v=Z0CU3suK8V8


http://www.youtube.com/watch?v=Gvpkw2SmYRY


http://www.youtube.com/watch?v=MuozyHiu5Jc


http://www.youtube.com/watch?v=P4S5ctQAlgs

[Kris.Is.Foamin]

ok so we have a hatter LOL. come on man for real. yea i sweep the floors. i also take the trash out, do exhaust work, run the dyno and anything else they have me do cause im the lowest "ranked" or whatever u wanna call it guy there. so what everyone has to start some where. im also going to school to be a mechanic. but enough about me ur "boy" with the black integra we told him to send us pics.... he never did.... he knows we waranty our work he only called once so okay we cant see what was wrong unless we can c what went wrong and if it was our fault. as far as the cams go we dont need type r cams..... REALLY.. we can go buy some dont need to still them. my point is if u dont like us ok dont bring ur car there. NOT HURTIN US. dont like our dyno then put it on a dyno jet. every shop has a customer that has complaints so whats new thats all apart of having a business. why hate on a shop for. if our tunner tunes a car and the tire pops going down the street they blame the tunner cause the tire was fine before it cam to our shop come on man be real. it will always be something. NOBODY CAN MAKE EVERY BODY HAPPY THERE ALWAYS A HATTER

I'd never let anyone that can't spell 'hater' even look at my car.

[nagger]

ok so we have a hatter LOL. come on man for real. yea i sweep the floors. i also take the trash out, do exhaust work, run the dyno and anything else they have me do cause im the lowest "ranked" or whatever u wanna call it guy there. so what everyone has to start some where. im also going to school to be a mechanic. but enough about me ur "boy" with the black integra we told him to send us pics.... he never did.... he knows we waranty our work he only called once so okay we cant see what was wrong unless we can c what went wrong and if it was our fault. as far as the cams go we dont need type r cams..... REALLY.. we can go buy some dont need to still them. my point is if u dont like us ok dont bring ur car there. NOT HURTIN US. dont like our dyno then put it on a dyno jet. every shop has a customer that has complaints so whats new thats all apart of having a business. why hate on a shop for. if our tunner tunes a car and the tire pops going down the street they blame the tunner cause the tire was fine before it cam to our shop come on man be real. it will always be something. NOBODY CAN MAKE EVERY BODY HAPPY THERE ALWAYS A HATTER


actually if the tire was fine before and you guys "TUNE IT" or whatever you guys call that shit, and it blows out all of a sudden, it may possibly be your fault, especially if you didnt see the tire was a kind that is known to be eaten up by dyno rollers (aka a slick) and you didnt suggest a switch to the customer before tuning......

but hey all i hear about is break in tunes from you guys, everything is always a BREAK in tune, yet i talk to the people and they say its fine for me to beat on it blah blah blah, but i never see any kind of power from any of the cars, and the only excuse is "its only the break in tune". yet i never see or hear about more, before the car A, blows up, or B, dissappears.......

but im deff not a fan of your shop, since the old days, nothing personal against the alledged "new guys" but i still havent seen or heard of any kind of REAL changes.

call me a hater or not, but i have seen how all the local shops work, some from the inside others from my friends being on the inside, and sorry to say, dyno inc is the last one id call a shop....... especially if rent cant be paid and the people who run the shop cant even get IN the shop. that means technically yall went out of business, because how do you do business when you cant get to half of the customers cars, or your own tools.....

[H22A-DA]

ok so we have a hatter LOL. come on man for real. yea i sweep the floors. i also take the trash out, do exhaust work, run the dyno and anything else they have me do cause im the lowest "ranked" or whatever u wanna call it guy there. so what everyone has to start some where. im also going to school to be a mechanic. but enough about me ur "boy" with the black integra we told him to send us pics.... he never did.... he knows we waranty our work he only called once so okay we cant see what was wrong unless we can c what went wrong and if it was our fault. as far as the cams go we dont need type r cams..... REALLY.. we can go buy some dont need to still them. my point is if u dont like us ok dont bring ur car there. NOT HURTIN US. dont like our dyno then put it on a dyno jet. every shop has a customer that has complaints so whats new thats all apart of having a business. why hate on a shop for. if our tunner tunes a car and the tire pops going down the street they blame the tunner cause the tire was fine before it cam to our shop come on man be real. it will always be something. NOBODY CAN MAKE EVERY BODY HAPPY THERE ALWAYS A HATTER

I'm sorry bro......You must be building the motors and tuning from what I have seen and heard of from numerous people!?!!!!?!!! Who is talking about tires blowing bro? Motors are what really hurt the pocket! My ''boy'' with the Integra didn't want to fuck with Dyno Inc. anymore after he found out how fucked up the motor was, being as he is not mechanically inclined but has money. He called like hundreds of times but never got an answer maybe like twice. Darius said "Who are you talking to like that?'' and hung up on him. Who leaves the oil pick up loose on a motor??? One of the most vital parts of the oil system!! As for haters, seems you have a bigger ''hatter'', the landlord of the shop that locked the doors and put the sign on the door!!

P.S. Go sweep the floor!!!!!!!!!!

[NasTHatch]

actually if the tire was fine before and you guys "TUNE IT" or whatever you guys call that shit, and it blows out all of a sudden, it may possibly be your fault, especially if you didnt see the tire was a kind that is known to be eaten up by dyno rollers (aka a slick) and you didnt suggest a switch to the customer before tuning......

but hey all i hear about is break in tunes from you guys, everything is always a BREAK in tune, yet i talk to the people and they say its fine for me to beat on it blah blah blah, but i never see any kind of power from any of the cars, and the only excuse is "its only the break in tune". yet i never see or hear about more, before the car A, blows up, or B, dissappears.......

but im deff not a fan of your shop, since the old days, nothing personal against the alledged "new guys" but i still havent seen or heard of any kind of REAL changes.

call me a hater or not, but i have seen how all the local shops work, some from the inside others from my friends being on the inside, and sorry to say, dyno inc is the last one id call a shop....... especially if rent cant be paid and the people who run the shop cant even get IN the shop. that means technically yall went out of business, because how do you do business when you cant get to half of the customers cars, or your own tools.....

we were in the shop the other night....

[coolva]

...but hey all i hear about is break in tunes from you guys, everything is always a BREAK in tune, yet i talk to the people and they say its fine for me to beat on it blah blah blah, but i never see any kind of power from any of the cars, and the only excuse is "its only the break in tune". yet i never see or hear about more, before the car A, blows up, or B, dissappears.......

Ya know what? Im sick of your mouth... All I hear about is the shit you talk. Im usually not the type who lowers myself to get involved with the gay internet bashing... but guess what... How about this... instead of going off of what OTHER people say and YOU talking shit... how about YOU run YOUR car against MY car and we will see what happens? After all... I built my engine and I tuned it, and being I tune the cars there... it should speak for my abilities! I will let you run whatever gas you want, and I will run pump gas! Again.. this needs to be YOUR CAR vs. MY CAR!

If for some reason you cant make this happen because your car is too slow, or broken or whatever... then how about you shut your stank ass mouth up? k thanks bye bye!

[Kris.Is.Foamin]

Ya know what? Im sick of your mouth... All I hear about is the shit you talk. Im usually not the type who lowers myself to get involved with the gay internet bashing... but guess what... How about this... instead of going off of what OTHER people say and YOU talking shit... how about YOU run YOUR car against MY car and we will see what happens? After all... I built my engine and I tuned it, and being I tune the cars there... it should speak for my abilities! I will let you run whatever gas you want, and I will run pump gas! Again.. this needs to be YOUR CAR vs. MY CAR!

If for some reason you cant make this happen because your car is too slow, or broken or whatever... then how about you shut your stank ass mouth up? k thanks bye bye!

Lol, what a great way for a shop employee to act.

Explains plenty. That and your illiterate sweeper guy.

This is classic.

[lacedemen]

Shit I got my car tuned there an it ran fine an hard, I dont no any of the guys there, but that guy tim did a good job on my whip. (all of you people hating on this shop, tell your mommy to give you more money, or go pick out of the money that you had handed to you an go elsewhere an get your shit worked on simple as that) but my car blew up from to small of pistons in a overly bored block, not from the guy that tuned it

[NasTHatch]

Ya know what? Im sick of your mouth... All I hear about is the shit you talk. Im usually not the type who lowers myself to get involved with the gay internet bashing... but guess what... How about this... instead of going off of what OTHER people say and YOU talking shit... how about YOU run YOUR car against MY car and we will see what happens? After all... I built my engine and I tuned it, and being I tune the cars there... it should speak for my abilities! I will let you run whatever gas you want, and I will run pump gas! Again.. this needs to be YOUR CAR vs. MY CAR!

If for some reason you cant make this happen because your car is too slow, or broken or whatever... then how about you shut your stank ass mouth up? k thanks bye bye!

he has a bike tim...............r1 i believe? but it would be a good run, especially since he ran the vet.....what was it a 2-2 run mike?


EDIT- i just read the RK story and it was a 1-1 run, but none the less......run his bike tim....

[nagger]

Ya know what? Im sick of your mouth... All I hear about is the shit you talk. Im usually not the type who lowers myself to get involved with the gay internet bashing... but guess what... How about this... instead of going off of what OTHER people say and YOU talking shit... how about YOU run YOUR car against MY car and we will see what happens? After all... I built my engine and I tuned it, and being I tune the cars there... it should speak for my abilities! I will let you run whatever gas you want, and I will run pump gas! Again.. this needs to be YOUR CAR vs. MY CAR!

If for some reason you cant make this happen because your car is too slow, or broken or whatever... then how about you shut your stank ass mouth up? k thanks bye bye!

hahaha im so happy to see that you as a employee of a shop is so offended by someone who really didnt even BASH you.

and im curious as to what you have heard about MY MOUTH about your shop. id love to hear what im always alledgedly saying........ i USED to trash talk your shop so much it wasnt funny, until a few friends told me straight up you guys had changed your staff, and became a better shop, and they had thier cars worked on by you guys and didnt have any issues, and yes i even said it myself a few times..... dyno inc has gotten better than they were when it first opened.
but since you just became ignorant shop worker number 1 in this thread, my opinions and im sure every one elses who will read this has changed. look BRO, im sorry your only way to solve shit is to race, and me not owning a shop is the kind of person you want to race like its a grudge match makes no sense to me. but honestly you dont know me at all, obviously because you just told me to race you and if you knew what i RACE NOW, you wouldnt be all hype about letting me choose what gas i want to run, or giving me advantages...... it should be me saying when, you run what ever GAS YOU WANT, what interstate, and how many car lengths you want me to give you so i can gain those back, and take 15 more.......... whether your dyno inc, accuracy automotive, or ramey built....... id make a statement almost identical if it came down to a race.....

you guys have prime local, a dyno, and alot of space, thats perfect shit to have to be a sucessful shop, but i think that you guys either A, have the wrong people working there again, or B, the wrong mentality towards it all. no shop employee should be sitting here trying to talk shit to a potential customer. especially one that knows the original staff of your job, the kind of sketch ball shit that has happened in that shop, the horror stories that people that have from your shop, when they go to another shop because they would much rather not deal with you guys anymore.

and keep in mind TIM, im the type of person that if i were to talk shit about you or have no regards for your shop whatsoever i would have blown this thread up along time ago........ and have a weekly post of another horror story that i get from your previous customers.........

[nagger]

Shit I got my car tuned there an it ran fine an hard, I dont no any of the guys there, but that guy tim did a good job on my whip. (all of you people hating on this shop, tell your mommy to give you more money, or go pick out of the money that you had handed to you an go elsewhere an get your shit worked on simple as that) but my car blew up from to small of pistons in a overly bored block, not from the guy that tuned it

and notice i have never said anything negative about this TIM guy. everyone who told me about him from the track rental awhile back had no real negative shit to say about him.......

but he wants to come at me like that so be it. shop employeesssss wooottttt


he has a bike tim...............r1 i believe? but it would be a good run, especially since he ran the vet.....what was it a 2-2 run mike?


EDIT- i just read the RK story and it was a 1-1 run, but none the less......run his bike tim....


yep it was 1-1 and the only reason i lost was because i didnt downshift completely and trust me i have had a re run with the same vette a few nights ago, i could go add to the story but the thread needs to die, its swayed off way to much.......

but the count is now 3 more higher in my favor, and alot more embarassing for the z06. aka the 15 car lengths i put on him this time almost instantly.....

[nagger]

Shit I got my car tuned there an it ran fine an hard, I dont no any of the guys there, but that guy tim did a good job on my whip. (all of you people hating on this shop, tell your mommy to give you more money, or go pick out of the money that you had handed to you an go elsewhere an get your shit worked on simple as that) but my car blew up from to small of pistons in a overly bored block, not from the guy that tuned it

and ohh wait i almost forgot about this post.....

last time i checked dyno inc is the cheapest shop in the area..................

so kids like you can save your lunch money, and turbocharge the single cams and shit and make mad HP YOOOOOOOOOOOOOOOOOO

no mommy needed here homeboy.

[lacedemen]

and ohh wait i almost forgot about this post.....

last time i checked dyno inc is the cheapest shop in the area..................

so kids like you can save your lunch money, and turbocharge the single cams and shit and make mad HP YOOOOOOOOOOOOOOOOOO

no mommy needed here homeboy.First off Im no kid and have my own house an payed for everything I have EVER owned THATS RIGHT I paid for, not no one else, not mommy not someone that died an left me money, dont beleave me ask ant an all them people that know me, I dont live off of any ones money I make my own, an had my daily car turboed, yes a single cam, I can go real big if i wanted to, but there is more important things in my life right now then worrying about being faster then this or that guy

[nagger]

First off Im no kid and have my own house an payed for everything I have EVER owned THATS RIGHT I paid for, not no one else, not mommy not someone that died an left me money, dont beleave me ask ant an all them people that know me, I dont live off of any ones money I make my own, an had my daily car turboed, yes a single cam, I can go real big if i wanted to, but there is more important things in my life right now then worrying about being faster then this or that guy

word up. tell your boy tim that as well.
i dont know you personally, i have seen your car get beat by a 4 door on portsmouth blvd etc etc, i just know after you had another local shop build your motor, i heard good things about the build, aka, nice turbo setup, nice shit used to build the motor, but i heard it started smoking like a freight train after you got it tuned. and now its blown up, and your selling the car for 1800 bucks.......

but the guy who put your motor together does great work, never had any issues with assembling any of the many motors he assembles and was told by alot of people that your setup was going to be good for alot of power.
what did that end up making im curious, last i heard it didnt make near what it should have. was it on a break in tune?????

[lamonte619]

I'm sorry bro......You must be building the motors and tuning from what I have seen and heard of from numerous people!?!!!!?!!! Who is talking about tires blowing bro? Motors are what really hurt the pocket! My ''boy'' with the Integra didn't want to fuck with Dyno Inc. anymore after he found out how fucked up the motor was, being as he is not mechanically inclined but has money. He called like hundreds of times but never got an answer maybe like twice. Darius said "Who are you talking to like that?'' and hung up on him. Who leaves the oil pick up loose on a motor??? One of the most vital parts of the oil system!! As for haters, seems you have a bigger ''hatter'', the landlord of the shop that locked the doors and put the sign on the door!!

P.S. Go sweep the floor!!!!!!!!!!

do u even have have fast car. just wondering i built my motor by my self. did u? if u did u maybe wanna race. no street racin my friend at the track. ill even bring my broom and dust pan to sweep ur excuses up after i mop u up. LMAO

[nagger]

do u even have have fast car. just wondering i built my motor by my self. did u? if u did u maybe wanna race. no street racin my friend at the track. ill even bring my broom and dust pan to sweep ur excuses up after i mop u up. LMAO

do you own the red integra?

[Chris G.]

do u even have have fast car. just wondering i built my motor by my self. did u? if u did u maybe wanna race. no street racin my friend at the track. ill even bring my broom and dust pan to sweep ur excuses up after i mop u up. LMAO

Just like you got mopped up on Magruder right?

[H22A-DA]

do u even have have fast car. just wondering i built my motor by my self. did u? if u did u maybe wanna race. no street racin my friend at the track. ill even bring my broom and dust pan to sweep ur excuses up after i mop u up. LMAO

umadbro?!?!?!? I'm sorry you have to look for another job now that Dyno Inc. is closed.:rolleyes:

[nagger]

Just like you got mopped up on Magruder right?

and the lake of coolant that that car left when it left the parking lot that night.

no but lamonte doesnt own that integra i dont think, he just drives it all the time. ionno why, but it doesnt matter either way.

[H22A-DA]

Shit I got my car tuned there an it ran fine an hard, I dont no any of the guys there, but that guy tim did a good job on my whip. (all of you people hating on this shop, tell your mommy to give you more money, or go pick out of the money that you had handed to you an go elsewhere an get your shit worked on simple as that) but my car blew up from to small of pistons in a overly bored block, not from the guy that tuned it

too small of pistons in an overbored block!?!?! I'll chalk that up to ANOTHER ONE BITES THE DUST! Do you have a tuned by Dyno Inc. sticker to go along with your smoking motor? Believe me I have been there. When another tuner looked at the map they put on my B16 turbo,he really had a good laugh.

[H22A-DA]

Oh and yes sweeper guy I have a ''quick'' B20 turbo hatch that has been running for a year and a half with a street tune. Have a good day and good luck on your job search!

[Kris.Is.Foamin]

do u even have have fast car. just wondering i built my motor by my self. did u? if u did u maybe wanna race. no street racin my friend at the track. ill even bring my broom and dust pan to sweep ur excuses up after i mop u up. LMAO

I'll race you.

Next driftwater. Either shut the fuck up or bring your shit out.

[lamonte619]

no i dont own the red integra thats my best friends car but he can smoke u too if he wants. and my car has never been street tuned..... i have a hatch and yes i will race ya i make a whoppin 310 hp and 255tq u want some lol

[lamonte619]

Oh and yes sweeper guy I have a ''quick'' B20 turbo hatch that has been running for a year and a half with a street tune. Have a good day and good luck on your job search!

so u ur slow......WORD!

[Grease Monkey]

wow.. this sure did turn to shit quick..

[nagger]

wow.. this sure did turn to shit quick..

all because people always think when i post im talking shit about someone.

i never knew i got under peoples skins this bad. im still laughing at how the people that work there are acting and trying to type, and use correct grammar, yet they want to work on peoples cars, which i must say is alot harder than proper english grammar.

[MORE IMPATIENT]

all because people always think when i post im talking shit about someone.
.


thats cause you are/ and always do...haha.....

i had a good experience at dyno inc a few years ago..I havent been up there in a minute and dont know anyone who works there now. When Tucker worked there and MJ was doing the tuning and such, I had my car tuned there and it ran great. But i have no experience with them as of the last few years.

[Kris.Is.Foamin]

no i dont own the red integra thats my best friends car but he can smoke u too if he wants. and my car has never been street tuned..... i have a hatch and yes i will race ya i make a whoppin 310 hp and 255tq u want some lol

Then bring it.

Keep your eye out for it in the events section.

[Chris G.]

Then bring it.

Keep your eye out for it in the events section.

Its a straight line car, why would he waste his time at Driftwater.

[Kris.Is.Foamin]

He said he wanted a race.

Someone needs to show him a 'fast car' doesn't need a million gangsta HP